Accessories

 For clamping workpieces on rulers etc.Weight 1.8 kg.

Adjustable length 38-138 mm. Adjustable height 0-0.2 mm. Recommended maximum workpiece weight 20 kg.

For mounting directly on the machine table. Adjustable length 35-135 mm. Includes 5 mm spacer for collision free set-up. Recommended maximum workpiece weight 20 kg. We...

3 mm Supplied in sets of 10 pcs.

5 mm Supplied in sets of 10 pcs.

System 3R 3R-333-T20, TORX Screwdriver Shipped and sold by System 3R For screws 3R-PI4.5x20E and 3R-PI4.5x25E.

For soldering electrode blanks on 3R-491E or 3R-SP19269. Supplied with flux. Supplied in sets of 100.

Drawbar Ø15 mm to mount MacroJunior holders in chucks 3R-400.XX and 3R-460.XX. Supplied in sets of 10.

Drawbar Ø15 mm to mount Macro holders in chucks 3R-460-XX.Supplied in sets of 10.

Drawbar Ø14x24 mm Rust-resistant Supplied singly

For setting angular positions and for centring.Measuring length 60 mm.

Check mandrel with ground C-reference. Measuring length 50 mm Weight 0.6 kg.

 To lift the locking ring of the drawbars.Supplied in sets of 2

Ø20x13 mm Rust resistant Supplied 1 pc.

Ø20x13 mm Rust resistant Supplied in sets of 20 pcs.

Ø20x13 mm Rust resistant Supplied in sets of 20 pcs.

Ø20x57 mm with flushing holes Ø7 mm Intended for MacroCombi automatic electrode changers. Supplied in sets of 10 pcs.

Ø20x57.1 mm with flushing hole Ø7 mm Supplied in sets of 10 pcs.

Ø20x57.1 mm with flushing hole Ø7 mm Supplied in sets of 40 pcs.

Drawbar Ø20x57,1 mm with flushing hole Ø7 mm Rust-resistant Supplied singly

Drawbar Ø20x32 mm Rust-resistant Supplied singly.

Drawbar Ø20x27 mm Rust-resistant Supplied singly.

Ø20x36.9 mm with flushing hole Ø7 mm Supplied in sets of 5 pcs. 

Ø20x36.9 mm with flushing hole Ø7 mm Supplied in sets of 20 pcs.  

Ø20x36.2 mm with flushing holes Ø7 mm Rust resistant Supplied in 1 pc.

 For round pallets adapted for automatic changing. Ø20x57.1 mm with flushing hole Supplied in sets of 10 pcs.

For round pallets adapted for automatic changing. Ø20x57.1 mm with flushing hole Supplied in sets of 40 pcs.

Drawbar Ø20x19 mm Rust-resistant Supplied singly.

 Check mandrel with ground C-reference for setting Macro chucks. Measuring length 110 mm Weight 2.3 kg.

 Check mandrel with ground C-reference for setting Macrochucks. Measuring length 110 mm Weight 2.3 kg.

 For setting angular positions and for centring Macro chucks. Ground hole for centring. Measuring length 100 mm Weight 1.4 kg.

 For setting angular positions and for centering Macro chucks. Measuring length 100 mm Weight 1.4 kg.

 Foot operation of pneumatic chucks.

 Unit for operation of pneumatic chucks. Two functions, open/closed.

 Unit for hand operation of pneumatic chucks. Three functions - open/neutral/closed.

Unit for operating pneumatic chucks in B-.axes. Two functions - opoen/closed with four seconds delay for air-blast cleaning.

 Suitable for some Macro chucks with drawbar 3R-605.1.Note: For more info please ask System 3R.

 Suitable for some Macro chucks with drawbar 3R-605.2.Note: For more info please ask System 3R.

 Suitable for some Macro chucks with drawbar 3R-605.1.Note: For more info please ask System 3R.

 Suitable for some Macro chucks with drawbar 3R-605.2.Note: For more info please ask System 3R.

 For centring 3R-600.20.

For pallet 70x70 mm.Suitable for some Macro chucks.Note: For more info please ask System 3R.

 For pallet 70x70 mm.suitable for some Macro chucks.Note: For more info please ask System 3R.

 For pallet Ø 75 mm.Suitable for some Macro chucks. Note: For more info please ask System 3R.

System 3R 3R-614-04, Torque wrench Shipped and sold by System 3R For Ø10 mm 3Refix mandrels. 4 Nm.

6 Nm.