Accessories

 Rubber guard for pallets 52x52 & 54x54 mm.Height 13 mm.

Rubber guard for pallets 52x52 & 54x54 mm.Height 33 mm.

 Rubber guard for pallets 70x70 mm.Height 13 mm.

 For pneumatic and manual chucks. Suits all chucks from MacroCombi to MacroMagnum. Required drawbar 3R-605.1 or similar Working range 1-25 kN. Weight 5 kg.

Taper attachment for mounting chucks in taper spindles.Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mou...

 Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks.Note: Does not work with sealing ring 3R-612.116.

Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks.Note: Does not work with sealing ring 3R-612.116.

Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.

 Intended for MacroMagnum chucks. Can also be used as a cover for unused chucks.

To convert 3R-600.24-S to enable long drawbar 3R-605.1.

System 3R C 860 000, Set ICS Double clamping M8 Shipped and sold by System 3R

Chip protection for HSP chuck, full-coverage.Matching lip seal C266090. Required drawbar: C282000 (not in scope of delivery) Material: aluminium, anodised Dimensions: ...

System 3R C266090, Seal ring, for HSP Shipped and sold by System 3R

Chip protection for HHP, PSP, PHP, PHPA chucks, full-coverage.Matching lip seal C286090. Required drawbar: C282000 (not in scope of delivery) Material: aluminium, anod...

 Supports and protects drawbar when storing pallets and devices. Material: plastic Dimensions: ø 80 x 55 mm

Chip protection for chuck, seals centre bore,Z-support of chuck remains usable. Material: plastic Dimensions: ø 28 x 32 mm M8 for dismounting

  For customer installation of index pins S814000 in pallet.

Protect the chucks against chips and liquids.Mounting with or without cover plate

Chip protection for HCP chuck, full-coverage. Required drawbar: C282000 (not in scope of delivery) Material: aluminium, anodised Dimensions: ø 113 x 22 mm

 Pre-centring for mid-sized to large workpieces.Should always be used wherever possible.Pre-centring bush for HCP/HSP/HHP

 Pre-centring for mid-sized to large workpieces.Should always be used wherever possible.Pre-centring spigot for the pallet / device.

Additional supports on base plates for pallets. Suitable for Delphin HCP/HSP/HHP  Height H = 13 mm 

With handling contour, prepared for chip. Dimensions: ø 156 x 30 mm 1 index pin in scope of delivery Required drawbar: C282000 (not in scope of delivery) Indexing pin...

  With handling contour, prepared for chip. Dimensions: ø 156 x 30 mm 1 index pin in scope of delivery Required drawbar: C282000 (not in scope of delivery) Indexing pi...

Material: steel stainless, hardened and ground Dimensions: 112 x 112 x 30 mm

 The clamping force test unit tests the clamping force of the chucks and must indicate a reading in the marked zone. Servicing is required if it does not.

 For positioning of chucks on horizontal machine table.Material: steel, stainless, hardened and ground

Alignment aid for chuck installation. For all chucks except PHPA Material: steel stainless, hardened and ground Diameter = 60 mm

The clamping force test unit tests the clamping force of the chucks and must indicate a reading in the marked zone. Servicing is required if it does not.

 Alignment aid for chuck installation. For all chucks Material: steel stainless, hardened and ground Diameter = 110 mm

Scope of delivery 4x E000331 socket head hexagon screws M8x40 4x E000334 socket head hexagon screws M8x50 4x E111111* T-nuts of your choice 4x E010124 plain washers M8...

Scope of delivery 4x E000401 socket head hexagon screws M10x40 4x E000409 socket head hexagon screws M10x50 4x E111111* T-nuts of your choice 4x E010103 plain washers ...

Scope of delivery 4x E000465 socket head hexagon screws M12x40 4x E000502 socket head hexagon screws M12x50 4x E111111* T-nuts of your choice 4x E010114 plain washers ...

For customer installation in indexing pallet. Material: steel, hardened Dimensions: ø8 x 20 mm Scope of delivery: 4 pieces Require mounting device C286080

Required tools for installation are combined in a tool case.(Contents include torque wrench and dial gauge)Installation hardware, such as connecting pipes and screw un...

For mounting of small electrodes in 3R-608.32, 3R-658.2E-S and 3R-658.4E-S.Supplied in sets of:1 mm, 10 pcs.2 mm, 10 pcs.3 mm, 10 pcs.5 mm, 10 pcs.