No products in the cart.
For mounting in a Macro chuck. Vertical mounting in die-sinking EDM machines and horizontal mounting in wire EDM machines. Flushing via flushing connection Speed r...
Sold:
For clamping in a vertical Macro chuck. Flushing via flushing connection. Control unit included Drawbar depends on chosen chuck Rust-resistant Immersible Speed range ...
Includes: 3R-225, Reference stop3R-272HP, Levelling adapter HP3R-292.3, SuperVice <100 mm3R-293.3, SuperVice Ø8-90 mm3R-294.3, Vice <100 mm3R-914.07, Torque wr...
Swivelling element to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps.Note: For angle setti...
Surface plate with reference stops, a mounting stone with bushings and holes for mounting a chuck/reference element and through holes for mounting on the surface plate...
3R-209-860, EconoRuler, 860 mm, 2 pcs. 3R-333-03, Allen key, 3 mm 3R-333-05, Allen key, 5 mm 3R-A209, Clamps, 2 pcs. Accessories
Includes:3R-239.1, Ruler vice3R-272HP, Levelling adapter HP3R-292.66HP, Magnum Holder HP
Vice for clamping round workpieces 15-155 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Recommended maximum workpiece weight 12 kg Tightening torque 10...
Replaced with part number 3R-680.24RS Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD requir...
For clamping a workpiece or fixture on a mounting head. Can be supplemented with 3Ruler accessories.Weight 3 kg.
For round workpieces15-150 mm diameter, or rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin mounting head. Recommended maximum workpiece wei...
Pneumatic chuck for Macro holder. Required drawbar 3R-605.1RS Clamping force 6000 N. Fixed index positions 4x90° Air-blast cleaning of Z-references Weight 4.1 kg.
Kit for clamping rectangular, round or thin workpieces.Contents:3R-239.1, Ruler vice3R-239.2, Low-profile holder3R-239.3, Vee holder3R-914-10L, Torque wrench, 8 Nm3R-...
3R-201J, Adapter 90°3R-204, Height adapter3R-602.27-1, Manual chuck for Macro3R-605.27RS, Drawbar3R-333-05, Allen key, 5 mm
For mounting Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted. Adjustable in three axes. Can be adapted to automatic changing w...
For collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø 3-15 mm respectively). Total clamping range, 60 mm (to be split between two workpi...
Vice for mounting rectangular workpieces 0-80 mm in the Macro system. Movable jaws for centred mounting. Can be supplemented with insert 16115-00 for mounting round w...
Includes:3R-232S, Levelling adapter3R-293.33, Universal holder3R-333-03, Allen key, 3 mm3R-333-05, Allen key, 5 mm
Vice for clamping round workpieces 8-90 mm. Recommended maximum workpiece weight 7 kg Tightening torque 8 Nm Weight 1.7 kg.
Chuck for Macro holder. For permanent mounting on the machine spindle or fixure. Required drawbar 3R-605.1RS Clamping force 6000 N Fixed index positions 4x90° Weight 2...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Carbide XY-references Required drawbar 3R-605.1 or 3R-605.4 Required air pressu...
For horizontal mounting of SuperVice and holders in vertical Macro chucks. Adjustable in three axes. Weight 1.5 kg.
For vertical or horizontal collision-free clamping of round workpieces (Ø 3-15 mm). Alternatively, rotate the movable jaw and use as a regular 3R-292.3 vice for rect...
Includes:3R-232S, Levelling adapter3R-292.6S, SuperVice Magnum3R-333-03, Allen key, 3 mm3R-333-05, Allen key, 5 mm
Hydraulic locking of set position.Note: For angle setting, 3R-216 is recommended. Can be monted on 3R-204 or directly on 3R-201J. Hardended. Weight 1.5 kg.
Chuck adapter for mounting Macro holders 90º in the Macro system. Supplied with drawbar 3R-605.5RS Fixed index positions 4x90º Clamping force 6000 N Ready for code car...
Adjustable length 38-138 mm. Adjustable height 0-0.2 mm. Recommended maximum workpiece weight 20 kg.
Movable jaws for mounting two rectangular workpieces at the same time. Detachable Z-support tabs ensure simple setting-up. Hardened. Recommended maximum workpiece wei...
Set of three holders and fixing parts.• Reversible jaws• Holder length 70/23.5 mm.• Recommended maximum workpiece weight 60 kg• Weight per set 3 kg
For clamping rectangular workpieces up to 100 mm. Tightening torque 3 Nm Weight 0.9 kg.
For clamping workpieces up to 50 mm. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system or Macropallet 54x54 mm. Tightening torque 3 Nm. Weight 1....
For setting angles on swivelling elements. Angles are set with gauge blocks. Measuring length 50 mm. Weight 1.4 kg.
Manual chuck with dual hydraulic chambers for Mini holders. Vertical or horizontal mounting in the WEDM system. Fixed index positions 4x90º. Weight 1.9 kg.
Page 1 of 5
to add multiple items to your quote, please fill qty field then click on "add to quote"