System 3R Magnum

Unhardened pallet with hardened reference element type 3R-681.71. Adapted for automatic changing Ready for code carrier Weight 4.5 kg.

MaxxMacro 2926HP WEDM Magnum SuperVice is 100% cross compatible with System 3R. WEDM Vice for clamping rectangular workpieces up to 155 mm.  Product Name MaxxMacro...

System 3R 3R-USHS027 Round Stainless Six-jaw Chuck with 2" - 3" Cap on Magnum. Specify "Sweet Spot" Shipped and sold by System 3R

System 3R 3R-USHS025 Round Stainless Three-jaw Chuck with 1" - 2" Cap. on Magnum. Specify "Sweet Spot" Shipped and sold by System 3R

System 3R 3R-USHS016 Magnet 6" x 6" for High Speed Milling on Magnum Pallet - X/Y/Z Are Controlled Dims. Shipped and sold by System 3R

System 3R 3R-USHS005 Magnet 6" x 6" Fine Pole on Magnum Pallet - X/Y/Z Are Controlled Dimensions Shipped and sold by System 3R

System 3R S370030 252 x 252 x 36mm 3R DirectBase 252, for Macro Magnum Shipped and sold by System 3R

System 3R 90356.20 Dynafix Pallet with Auto Magnum Chuck Shipped and sold by System 3R

System 3R 3R-680.1-3-V VDP Automatic Macro Magnum - 230mm Dia. Shipped and sold by System 3R

System 3R 3R-680.1-3V Macro Magnum Flat Chuck VDP Shipped and sold by System 3R

System 3R 3R-680.1-2V Pneumatic Magnum VDP chuck Shipped and sold by System 3R

System 3R 3R-US682.600-M 600.28-S Macro Chuck Mounted to a 681.51-SA Macro Magnum Pallet Shipped and sold by System 3R

System 3R 3R-682.70-S Sealing ring 70x70 mm, Magnum Shipped and sold by System 3R

System 3R 3R-682.600-RS Adapter RS Magnum to Macro Shipped and sold by System 3R

System 3R 3R-682.600-245 MAGNUM Pyramid with 5 MACRO Chucks Shipped and sold by System 3R

System 3R 3R-682.600-244 MAGNUM Pyramid with 4 MACRO Chucks Shipped and sold by System 3R

System 3R 3R-681.51 Pallet Ø156 mm, 3Refix, Macro Magnum Shipped and sold by System 3R

System 3R 3R-681.2424-T8A Macro Magnum 240mm Sq. Aluminum Pallet w/”T”-slots - for Automation Shipped and sold by System 3R

System 3R 3R-681.2424-M6A Macro Magnum 240mm Sq. Aluminum Pallet w/M6 threaded holes - for Automation Shipped and sold by System 3R

System 3R 3R-680.1-3 Macro Magnum Flat Chuck - universal - requires 605.2 Drawbar Shipped and sold by System 3R

For permanent mounting on the machine table. Supplied with drawbar 3R-605.2 Required air pressure 6 ±1 bar Fixed index positions 4x90º Flushing duct Air-blast cleanin...

System 3R 3R-680.10-2RS Magnum table chuck RS Shipped and sold by System 3R

System 3R 3R-680.10-2ARS Magnum table chuck RS adapt Shipped and sold by System 3R

System 3R 3R-292.6HPK WEDM Supervise 0-6" Magnum HP Style w/Torque Wrench Shipped and sold by System 3R

System 3R 3R-292.6-8HPK WEDM Supervise 0-8" Magnum HP Style w/Torque Wrench Shipped and sold by System 3R

System 3R 3R-292.66-L-HP WEDM 3Ruler Angle Vise - Magnum - HP Shipped and sold by System 3R

System 3R 3R-292.61HPK WEDM Supervise 0-6" Magnum-HP-No Cutouts in Jaw w/Torque Wrench Shipped and sold by System 3R

Chuck adapter with built-in pneumatic Macro Magnum chuck for mounting in C 219 800. Built-up height 80 mm X/Y-centring with springy cams, hardened, stainless Adapted f...

Chuck adapter with built-in pneumatic MacroMagnum chuck for mounting in 3R-770-1A or 3R-700-5A.

Hardened pallet with clearence holes for fixing screws.Note: Must be mounted on the workpiece/fixture before it is locked in a chuck. Rust-resistant Weight 1 kg.

  For permanent mounting on the machine table. Supplied with drawbar 3R-605.2 Required air pressure 6 ±1 bar Fixed index positions 4x90º Flushing duct Air-blast clean...

Manual vibration-damped (VDP) table chuck. Required drawbar 3R-605.2 Recommended tightening torque: Macro pallet 4 Nm Recommended tightening torque: MacroMagnum pallet...

 Unhardened pallet with hardened references and hole markings for eight clearance holes. Adapted for automatic changing Ready for code carrier Weight 4.5 kg.

 Chuck adapter with built-in pneumatic Macro chuck for mounting in 90724.Weight 4.5 kg

From MacroMagnum into Macro system. Chuck adapter with built-in Macro chuck. Requires drawbar 3R-605.2 or similar. Solid X & Y-References Recommended clamping torq...

 Including:3R-680.24-S, MacroMagnum chuck, Manual, Low profile3R-681.51-SA, MacroMagnum Pallet Ø156 mm, 4 pcs.3R-605.2, Drawbar, 2 pcs.

 For permanent mounting on the machine spindle or table.Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation. Required drawbar 3R-605.2. Recommended...

 Pneumatic chuck for machine spindles and lathes. Opened/locked by an air gun against a valve on the side, or alternatively on the back, of the chuck. Required drawbar...

 Pneumatic table chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of the Z-references Sealing ...

 Pneumatic table chuck for chuck adapter. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of Z-refer...

Can be supplemented with 3Ruler accessories.Note: Mounts on an HP mounting head.Weight 3 kg.

Vice with solid jaws for clamping rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 15 Nm Weight 2.8 kg.

Vice for clamping rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 10 Nm Weight 2.7 kg.

For round workpieces15-150 mm diameter, or rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin mounting head. Recommended maximum workpiece wei...

Vice for clamping rectangular workpieces up to 155 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 15 Nm Weight 2.8 kg.

Vice for clamping round workpieces 15-155 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Recommended maximum workpiece weight 12 kg Tightening torque 10...

  For mounting Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted. Adjustable in three axes. Can be adapted to automatic changing w...