Macro 54 and Macro 70 Performance Workholding

System 3R 44000-M011 3mm Measuring tip for 3R-656.31-3P shipped and sold by System 3R

MaxxMacro Short Manual Drawbar 6052 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawba...

MaxxMacro 70 Stainless Performance Rust Proof Pallet with .250" Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R...

System 3R 3R-659.16-P Macro Collet Holder for ER16 Collets Shipped and sold by System 3R

Ø20x36.9 mm with flushing hole Ø7 mm Supplied in sets of 5 pcs.

MaxxMacro 54 ER Collet Chuck ER16 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To clamp cylindric...

MaxxMacro Drawbar Plastic Locking Ring Clip SSP07082E comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system...

Hardened with 3Refix holes, flushing connection and clearance holes for six fixing screws. 3Refix Ø10 mm Adapted for automatic changing Ready for code carrier Para...

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck. Adapted for a...

For mounting Mini holders in the Macro system. MacroStandard coupling Can be changed automatically Weight 1.3 kg.

Distance adapter to extend the mache spindle. Mechanical clamping from the side. Extension length 100 mm. Recommended clamping torque 6 Nm Required drawbar 3R-605.2 W...

System 3R 3R-600.24-S, Manual chuck, MacroStandard Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine t...

To protect M12 holes with protective countersinking from dirt.Supplied in sets of 50 pcs.

MaxxMacro Long Automatic Drawbar 605 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawb...

MaxxMacro 54 Stainless Cast Plated Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened a...

MaxxMacro Combi Drawbar 40516 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar comp...

MaxxMacro 54 Stainless Slotted Electrode Holder U35 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. ...

MaxxMacro Drawbar Flushing O-rings 10pcs comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Seals drawb...

Ø20x57.1 mm with flushing hole Ø7 mm Supplied in sets of 10 pcs.

Ø20x57.1 mm with flushing hole Ø7 mm Supplied in sets of 40 pcs.

For setting angular positions. Ground outside diameter for centring. Measuring length 50 mm Weight 0.8 kg.

Check mandrel with ground C-reference for setting Macro chucks. Measuring length 110 mm Weight 2.3 kg.

Measuring probes with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10°, Y-Axis ±10°, Z-Axis ±3 mm Building-in he...

For 0-3 mm electrodes.Weight 0.8 kg.

Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws. 3Refix Ø10 mm Adapted for automatic changing Ready for code carrier Parall...

For mounting Mini holders in the Macro system. MacroHP coupling Can be changed automatically Rust-resistant Weight 1.3 kg.

Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.10 Clamping force 6000 N Fixed index positions 4x90º Air-blast cleaning of Z-refer...

3Refix Ø10 mm Recommended tightening torque 4 Nm. Supplied in sets of 10 Nm Weigth per set 0.2 kg. Note: When positioning with 3Refix mandrels - always tighten the ex...

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling.Note: Chuck to be ordered separately.

MaxxMacro 70 Stainless Control Ruler Master WEDM Master for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in...

MaxxMacro 70 Stainless Self Centering Vise 80x120mm Precision self-centering vise with dual-screw for perfect alignment. 120mm range, ideal for 5-axis CNC, modular jaw...

Precision self-centering vise with dual-screw for perfect alignment. 65mm range, ideal for 5-axis CNC, modular jaws, and quick changeovers.

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM sys...

MaxxMacro 54 Aluminum Manual Vertical Extension 250mm Distance adapter to extend the mache spindle. Mechanical clamping from the side. MaxxDesign Exclusive Features: ...

MaxxMacro 54 Aluminum Manual Vertical Extension 200mm Distance adapter to extend the mache spindle. Mechanical clamping from the side. MaxxDesign Exclusive Features: ...

MaxxMacro 70 Manual QuickChuck Low Profile Repair Kit Rust Proof Product Specifics Included Items: Kernel, 8mm Bearing ball, 5mm Steel Dowel Pin, Compression spring...

MaxxMacro 54 Manual QuickChuck Repair Kit Rust Proof MaxxDesign Exclusive Features: High quality materials. Internal Repair kit Product Information: MaxxMacro QuickC...

MaxxMacro 54 Multi 4 QuickChuck Chuck Precision Rail Rust Proof Precision rail with multiple chucks for easier installation and a more space-saving setup. MaxxDesign E...

MaxxMacro 70 Manual QuickChuck Low Profile Chuck Rust Proof for Reference Element comes fully assembled and ready to use. This product is 100% cross-compatible with th...

MaxxMacro 70 Low Profile Manual Chuck with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM sy...

MaxxMacro 54 Super Vise Compact comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vise for mounting re...

MaxxMacro 54 Stainless Full Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system....

MaxxMacro 54 Stainless Blank Round Stock Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To m...

MaxxMacro 54 Manual QuickChuck Chuck with WEDM Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM syste...

MaxxMacro 54 Brass Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electr...

MaxxMacro 54 Stainless Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount el...

MaxxMacro 54 Aluminum Full Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount ele...