Products

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 20H6 mm Outside diameter 28h6 mm Height 20 mm Supplied in sets of 10 pcs.

Replaced with part number 3R-680.24RS Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD requir...

System 3R 3R-914-03 Torque wrench, 3 Nm shipped and sold by System 3R

System 3R 3R-914-04 Torque wrench, 4 Nm shipped and sold by System 3R

System 3R 3R-914-06 Torque wrench, 6 Nm shipped and sold by System 3R

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

System 3R 3R-914-07L Torque wrench, 7.8 Nm shipped and sold by System 3R

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

System 3R 3R-915-20E Plastic plug, 50 pcs., 3Refix shipped and sold by System 3R

To protect M12 holes with protective countersinking from dirt.Supplied in sets of 50 pcs.

Reference table of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as wel...

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S. Supplied with insulation plate and fixing screws.Flushing connection.

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Supplied with fixing screws for chuck and table.Note: Chuck to be ordered separately.

System 3R 3R-A209 Clamps, EconoRuler Shipped and sold by System 3R

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling.Note: Chuck to be ordered separately.

Clamps of aluminium for mounting a ruler directly on the machine table without reference elements. Supplied in sets of 2, with M8 screw and washers Weight per set 0.3 kg

Clamps for clamping rulers on reference elements.Supplied in sets of 2.

For mounting 3R-600.28-S

System 3R 3R-A26675 Adapter plate Ø100 chuck Shipped and sold by System 3R

To convert 3R-600.28-S to enable long drawbar 3R-605.1.Extra height 18.5 mm.

System 3R 3R-A34249 DISTANCE FOR PRESS CHUCK shipped and sold by System 3R

System 3R 3R-A34312-M110 Adapter plate Matrix110 SP shipped and sold by System 3R

System 3R 3R-A34312-M142 Adapter plate Matrix142 SP shipped and sold by System 3R

System 3R 3R-A34312-M185 Adapter plate Matrix185 SP shipped and sold by System 3R

System 3R 3R-A34312-M220 Adapter plate Matrix220 SP shipped and sold by System 3R

Adapter plate with eight adjusting screws for mounting spindle chucks. Supplied with fixing screws. M10 for 90 mm pitch circle M6 for 96 mm pitch circle M8 for 100 mm ...

Aluminium pallet. Building-in height 50.1 mm Ready for code carrier Weight 12.1 kg.

System 3R 3R-ER16-00 Collet Set (10 pcs. ER16 Collets .5mm to 10mm) Shipped and sold by System 3R

System 3R 3R-ER16-01 Collet - Single ER16 0.5 to 1.0mm Shipped and sold by System 3R

System 3R 3R-ER16-02 Collet - Single ER16 1.0 to 2.0mm Shipped and sold by System 3R

System 3R 3R-ER16-03 Collet - Single ER16 2.0 to 3.0mm Shipped and sold by System 3R

System 3R 3R-ER16-04 Collet - Single ER16 3.0 to 4.0mm Shipped and sold by System 3R

System 3R 3R-ER16-05 Collet - Single ER16 4.0 to 5.0mm Shipped and sold by System 3R

System 3R 3R-ER16-06 Collet - Single ER16 5.0 to 6.0mm Shipped and sold by System 3R

System 3R 3R-ER16-07 Collet - Single ER16 6.0 to 7.0mm Shipped and sold by System 3R

System 3R 3R-ER16-08 Collet - Single ER16 7.0 to 8.0mm Shipped and sold by System 3R

System 3R 3R-ER16-09 Collet - Single ER16 8.0 to 9.0mm Shipped and sold by System 3R

System 3R 3R-ER16-10 Collet - Single ER16 9.0 to 10.0mm Shipped and sold by System 3R

Note: Intended for Macro & MacroJunior.Collet Ø1-0,5 mmCollet Ø2-1 mmCollet Ø3-2 mmCollet Ø4-3 mmCollet Ø5-4 mmCollet Ø6-5 mmCollet Ø7-6 mmCollet Ø8-7 mmCollet Ø9-...