Products

System 3R 3R-778.1-20 Dynafix Starter KIT shipped and sold by System 3R

With pre-programmed unique identity, designed for Macrojunior 25 mm, 3R-491E.Supplied in sets of 10.

With pre-programmed unique identity, designed for 3Ready-to-Run, 3R-494-XX.XX.Supplied in sets of 10.

System 3R 3R-901-10 3Refix mandrel, Ø10 mm Shipped and sold by System 3R

System 3R 3R-901-10-TX 3Refix mandrel Ø10 EDM, TORX Shipped and sold by System 3R

3Refix Ø10 mm Recommended tightening torque 4 Nm. Supplied in sets of 10 Nm Weigth per set 0.2 kg. Note: When positioning with 3Refix mandrels - always tighten the ex...

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø10 mm Recommended tightening torque 4 Nm Supplied in se...

 Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø10 mm Recommended tightening torque 4 Nm Supplied in s...

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø10 mm Rust resistant Recommended tightening torque 4 Nm...

System 3R 3R-901-10RS-TX 3Refix mandrel Ø10 WEDM, TORX Shipped and sold by System 3R

System 3R 3R-901-20 3Refix mandrel, Ø20 mm Shipped and sold by System 3R

System 3R 3R-901-20/70RS 3Refix mandrel, Ø20/70 mm, RS shipped and sold by System 3R

 Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø20 mm Recommended tightening torque 10 Nm Supplied in ...

System 3R 3R-901-20PM-TX 3Refix mandrel, Ø20 mm, Torx Shipped and sold by System 3R

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø20 mm Rust-resistant Recommended tightening torque 10 N...

System 3R 3R-901-30 3Refix dia 30 shipped and sold by System 3R

System 3R 3R-902-10 3Refix bushings, Ø10 mm shipped and sold by System 3R

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 10H7 mm Outside diameter 15h6 mm Height 12 mm Supplied in sets of 30 pcs.

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 20H6 mm Outside diameter 28h6 mm Height 20 mm Supplied in sets of 10 pcs.  

Replaced with part number 3R-680.24RS Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD requir...

System 3R 3R-914-03 Torque wrench, 3 Nm shipped and sold by System 3R

System 3R 3R-914-04 Torque wrench, 4 Nm shipped and sold by System 3R

System 3R 3R-914-06 Torque wrench, 6 Nm shipped and sold by System 3R

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

System 3R 3R-914-07L Torque wrench, 7.8 Nm shipped and sold by System 3R

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

System 3R 3R-915-20E Plastic plug, 50 pcs., 3Refix shipped and sold by System 3R

Plug to protect Ø20 mm hole from dirtSupplied in sets of 50 pcs.

To protect M12 holes with protective countersinking from dirt.Supplied in sets of 50 pcs.

Reference table of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as wel...

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S. Supplied with insulation plate and fixing screws.Flushing connection.

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Supplied with fixing screws for chuck and table.Note: Chuck to be ordered separately.