No products in the cart.
MaxxMacro A239 Clamps non-rail MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro...
Sold:
MaxxMacro 23926 Stepped 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the Syste...
MaxxMacro 54 Stainless Performance Pallet 70mm Riser With Gripper Slots comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3...
MaxxMacro 239251 Standard Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3...
MaxxMacro 75 Stainless Performance Rust Proof Pallet with .250" Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R...
MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Ma...
MaxxMacro 23925 Standard 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the Syst...
MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Ma...
MaxxMacro 23922 Stepped Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R ...
MaxxMacro 70 Stainless Performance Rust Proof Pallet with 6mm Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R M...
MaxxMacro 70 Stainless Performance Rust Proof Pallet with .250" Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R...
MaxxTooling Stainless ER32 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-...
MaxxMacro Eccentric Endstop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. ...
MaxxTooling Stainless ER20 Collet Replacement Locking Nut Rust Proof can be used to complement products and product lines for various systems, such as MaxxMacro, Maxx-...
MaxxMacro Combi Drawbar 40516 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar comp...
MaxxMacro Long Automatic Drawbar 605 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawb...
MaxxMacro 54 Stainless Performance Rust Proof Pallet with 6mm Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R M...
MaxxMacro 54 Stainless Performance Rust Proof Pallet with .250" Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R...
MaxxMacro Manual Drawbar 60527 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system....
MaxxMacro Automatic Drawbar 60514 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM syst...
To lift the locking ring of the drawbars.Supplied in sets of 2
MaxxMacro Short Manual Drawbar 6052 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawba...
MaxxMacro Automatic Drawbar 60510W Low Profile Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM sys...
MaxxMacro Rail Clamps Screw Replacement MXRuler Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM sy...
MaxxMacro Junior Drawbar 40511 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar com...
MaxxMacro Drawbar Combi Plastic Clip SSP13854E comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Locki...
System 3R 90840.2 Macro Matrix WEDM chuck Macro Press-system
System 3R 3R-US294.2K WEDM Vise – Vertical - 0 to 2” with Torque Wrench shipped and sold by System 3R
System 3R 3R-205.3 Pallet, WEDM shipped and sold by System 3R
System 3R 3R-US065 WEDM/Macro Presetting Station with Automatic Chuck 602.10-1 Shipped and sold by System 3R
System 3R 3R-US021 WEDM Presetting Station 12 x 8 x 4 with 200.1J-P1 Shipped and sold by System 3R
System 3R 3R-US294.5-5K WEDM Vise - Vertical – 0 to 5” with Torque Wrench Shipped and sold by System 3R
System 3R 3R-US292.3-8IN WEDM Supervise 0 - 8" Opening Shipped and sold by System 3R
System 3R 3R-230.3 WEDM 8mm Clamping Kit Shipped and sold by System 3R
System 3R C 860 000, Set ICS Double clamping M8 Shipped and sold by System 3R
Clamping support for the direct installation on WEDMmachine table. Support lips „+4“ and „0“ Recommended maximum workpiece weight 50 kg in applicationas support elemen...
Adapter for ICS clamping elements; with Unimatic dovetail slide. ICS C Weight 0.6 kg.
Adapter for ICS clamping elements; with Unimatic dovetail slide. ICS B Weight 0.4 kg.
Adapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS B
Adapter for ICS clamping elements; with Unimatic dovetail slide. ICS A Weight 0.3 kg.
Adapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS C
Apapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS A
3R Zeroline clamping support, C 666 050 Clamping support for the direct installation on WEDM machine table. Support lips “+5”, “+4” and “0” 3R interface for the insta...
consisting of:C 666 020 Clamping support 300C 666 050 Clamping support 180C 666 052 Support lips ’’+5’’, 2 pcs.N 150 000 Support lips ’’+4’’, 4 pcs.C 666 022 Support ...
Multiple holder 220 for ten workpieces Ø2-20 mm at the same time. Mount direct on table or with a levelling head. C-C = 30 mm. Squareness 0,1 mm/100 mm. Weight 3.1 kg.
The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.Note: See also...
Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With ...
For collets ER32 Electrode size 2-20 mm Flushing duct Building-in height 94 mm Weight 1.2 kg.
Page 9 of 10
to add multiple items to your quote, please fill qty field then click on "add to quote"
English
French
German
Italian
Russian
Spanish
English
Français
Deutsch
Español