System 3R Tooling

 For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Precision-cast Macro reference element Adapted for automatic ch...

   For vertical mounting in EDM machines with Macro chuck. Speed range 60-2000 rev/min Flushing via flushing connection Control unit included Required drawbar 3R-605....

 For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode. Precision-cast Macro reference element Adapted for ...

 Pneumatic vibration-damped chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the Z-referen...

 Pneumatic chuck locked/opened with air gun. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90º Air-blast cleaning of the ...

Pneumatic vibration-damped chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the Z-referenc...

 Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.2 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 2 kg.

 Pneumatic chuck for permanent mounting on the machine table. Drawbar 3R-605.2RS included Required air pressure 6±1 bar Fixed index positions 4x90° Rust resistant Weig...

Drawbar Ø14x24 mm Rust-resistant Supplied singly

 Chuck adapter, stainless steel, for MacroJunior holders in the Macro system. Axial locking screw. Fixed index positions 3x120° and 4x90º Clamping force 6000 N Weight ...

Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...

Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system. Fixed index positions 3x120°. Clamping force 6000 N. Weight 1.8 kg.

5 mm Supplied in sets of 10 pcs.

3 mm Supplied in sets of 10 pcs.

For soldering electrode blanks on 3R-491E or 3R-SP19269. Supplied with flux. Supplied in sets of 100.

Check mandrel with ground C-reference. Measuring length 50 mm Weight 0.6 kg.

Contents:3R-405.11, Drawbar, MacroJunior, 5 pcs.3R-405.16, Drawbar, Macro, 5 pcs.3R-460.31-5, Manual table chuck, Macro3R-465-L, Holder, MacroJunior, 2 pcs.3R-465-V, H...

Drawbar Ø15 mm to mount Macro holders in chucks 3R-460-XX.Supplied in sets of 10.

Drawbar Ø15 mm to mount MacroJunior holders in chucks 3R-400.XX and 3R-460.XX. Supplied in sets of 10.

Journal Ø10x10 mm. Intended mainly for graphite electrodes. To be mounted on 3R-491E with three MFT4x12 screws and adhesive.Supplied in sets of 30.

For round electrodes Ø4-8 mm or square < 8x18 mm, and with maximum height 30 mm.Supplied in sets of 5.

For colles ER16 Electrode sizes 0.5-10 mm Building-in height 59.5 mm Weight 0.2 kg.

For setting angular positions and for centring.Measuring length 60 mm.

For collets ETS10 Electrode sizes 0.1-2 mm Building-in heigth 47 mm Weight 0.1 kg.

The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.Supplied in sets of 30.

 Top and bottom faces parallel-ground to within 0.002 mm.NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing. Adapted for autom...

For mounting on a lathe taper.Note: When ordering a lather taper, use attached order form. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 1.8 kg

For mounting on the machine spindle or in a fixture on the machine table. Required drawbar 3R-405.11 Required air pressure 6±1 bar Fixed index positions 3x120° Air-bla...

MacroJunior Pallet 25 mm with factory mounted copper blank. Round blank Ø50x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Round blank Ø16x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 26x26x50 mm. Supplied in sets of 10 pcs.

 For mounting on machine spindle. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 0.8 kg

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 40x40x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 12x12x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Round blank Ø26x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 40x22x50 mm. Supplied in sets of 10 pcs.

 For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture. Required drawbar...

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 32x22x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 22x22x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Round blank Ø22x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Round blank Ø32x50 mm. Supplied in sets of 10 pcs.

MacroJunior Pallet 25 mm with factory mounted copper blank. Square blank 32x32x50 mm. Supplied in sets of 10 pcs.