System 3R Tooling

For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 125 mm Weight 5.7 kg.

Note: In automation the gripper has to grip on the pallet and not on the drawbar.Weight 0.5 kg.

 For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 100 mm Weight 3.4 kg.

 For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 80 mm Weight 1.6 kg.

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S. Supplied with insulation plate and fixing screws.Flushing connection.

 For mounting 3R-600.28-S

 Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø10 mm Recommended tightening torque 4 Nm Supplied in s...

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

Clamps of aluminium for mounting a ruler directly on the machine table without reference elements. Supplied in sets of 2, with M8 screw and washers Weight per set 0.3 kg

 Clamps for clamping rulers on reference elements.Supplied in sets of 2.

Replaced with part number 3R-680.24RS Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD requir...

Adapter plate with eight adjusting screws for mounting spindle chucks. Supplied with fixing screws. M10 for 90 mm pitch circle M6 for 96 mm pitch circle M8 for 100 mm ...

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 20H6 mm Outside diameter 28h6 mm Height 20 mm Supplied in sets of 10 pcs.  

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 10H7 mm Outside diameter 15h6 mm Height 12 mm Supplied in sets of 30 pcs.

Reference table of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as wel...

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø10 mm Rust resistant Recommended tightening torque 4 Nm...

 Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø20 mm Recommended tightening torque 10 Nm Supplied in ...

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø10 mm Recommended tightening torque 4 Nm Supplied in se...

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first. 3Refix Ø20 mm Rust-resistant Recommended tightening torque 10 N...

To convert 3R-600.28-S to enable long drawbar 3R-605.1.Extra height 18.5 mm.

With pre-programmed unique identity, designed for Macrojunior 25 mm, 3R-491E.Supplied in sets of 10.

With pre-programmed unique identity, designed for 3Ready-to-Run, 3R-494-XX.XX.Supplied in sets of 10.

System 3R 3R-691.7-142 Pallet, Matrix 142 Shipped and sold by System 3R

System 3R 3R-691.1-185 Pallet, Matrix 185 Shipped and sold by System 3R

System 3R 3R-691.1-110 Pallet, Matrix 110 Shipped and sold by System 3R

System 3R 3R-690.1-185-RS Macro Matrix 185 Chuck in Stainless Steel for Wire EDM Use Shipped and sold by System 3R

System 3R 3R-651.75-50 Pallet Ø75 mm, 50 t, Macro Shipped and sold by System 3R

System 3R 3R-680.1-3-V VDP Automatic Macro Magnum - 230mm Dia. Shipped and sold by System 3R

System 3R 3R-680.1-2V Pneumatic Magnum VDP chuck Shipped and sold by System 3R

System 3R 3R-682.70-S Sealing ring 70x70 mm, Magnum Shipped and sold by System 3R

System 3R 3R-682.600-RS Adapter RS Magnum to Macro Shipped and sold by System 3R

System 3R 3R-682.600-245 MAGNUM Pyramid with 5 MACRO Chucks Shipped and sold by System 3R

System 3R 3R-682.600-244 MAGNUM Pyramid with 4 MACRO Chucks Shipped and sold by System 3R

System 3R 3R-681.51 Pallet Ø156 mm, 3Refix, Macro Magnum Shipped and sold by System 3R

System 3R 3R-681.2424-T8A Macro Magnum 240mm Sq. Aluminum Pallet w/”T”-slots - for Automation Shipped and sold by System 3R

System 3R 3R-681.2424-M6A Macro Magnum 240mm Sq. Aluminum Pallet w/M6 threaded holes - for Automation Shipped and sold by System 3R

System 3R 3R-680.1-3 Macro Magnum Flat Chuck - universal - requires 605.2 Drawbar Shipped and sold by System 3R