System 3R Tooling

 Intended for MacroMagnum chucks. Can also be used as a cover for unused chucks.

 Distance adapter to extend the mache spindle. Mechanical clamping from the side. Solid X & Y-references Extension length 250 mm Ready for automation Flushing duct...

Distance adapter to extend the mache spindle. Mechanical clamping from the side. Solid X & Y-references Extension length 200 mm Ready for automation Flushing duct ...

Pneumatic vibration-damped chuck, low-profile version. Required drawbar 3R-605.10 Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the ...

Two ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.1 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct W...

 Pneumatic built-in chuck with swivel in the back. For high RPM Machine adapted.

Requires chuck 90803.50 Through hole Ø 16 mm Weight 0.2 kg.

 For manual Macro chuck, i.g. 3R-600.27-XX. Height 47 mm Weight 2.8 kg.

System 3R C 860 000, Set ICS Double clamping M8 Shipped and sold by System 3R

Clamping support for the direct installation on WEDMmachine table. Support lips „+4“ and „0“ Recommended maximum workpiece weight 50 kg in applicationas support elemen...

Adapter for ICS clamping elements; with Unimatic dovetail slide. ICS C Weight 0.6 kg.

Adapter for ICS clamping elements; with Unimatic dovetail slide. ICS B Weight 0.4 kg.

 Adapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS B

 Adapter for ICS clamping elements; with Unimatic dovetail slide. ICS A Weight 0.3 kg.

Adapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS C

 Apapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS A

 3R Zeroline clamping support, C 666 050 Clamping support for the direct installation on WEDM machine table. Support lips “+5”, “+4” and “0” 3R interface for the insta...

 Swivelling element to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps.Note: For angle setti...

Clamping bar to use with ICS clamping frame C 619 680. Dimensions 88 x 20 x 26 mm. Overall height 26 mm (incl. support lips and clamping lips). Weight 0.25 kg.

  Carrier for flat round or cubic workpieces up to 80x80 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Functional height 13 mm  Clamping range round ...

For manual mounting of Unimatic holders and Unimatic clamping elements in the Macro system. Adjusting pallet with dovetail guide adaptation. Adjustment range ±0.2 mm f...

 For mounting Unimatic holders in WEDM, Macro and MacroTwin mounting heads.

Built-up height: 52 mm Air connections positioned centrally on the underside– prism – Z-cleaning – clamping/releasing – Turbo/ventilation Clamping force: 30 000 N/80 ...

To convert 3R-600.24-S to enable long drawbar 3R-605.1.

 Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks.Note: Does not work with sealing ring 3R-612.116.

Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks.Note: Does not work with sealing ring 3R-612.116.

Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.