System 3R Chucks

 Pneumatic vibration-damped chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the Z-referen...

 Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.2 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 2 kg.

 Pneumatic chuck locked/opened with air gun. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90º Air-blast cleaning of the ...

 For vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Fixed index positions 24x15° Vernier scale Weight 5.5 kg.

Pneumatic chuck locked/opened with air gun. Required drawbar 3R-605.1 or 3R-605.4 All references of hardened and ground steel Required air pressure 6±1 bar Fixed index...

 Manual vibration-damped chuck, Ø170 mm. Required drawbar 3R-605.2 Tightening torque 6 Nm Building-in height 85 mm. Centre spacing 63 to 100 mm Weight 6 kg.

Pneumatic vibration-damped chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the Z-referenc...

 Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.2 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 2 kg.

   Pneumatic chuck for mounting directly on the machine spindle.   Note: When ordering state machine make and type.Note: X/Y/Z references in hardened and ground steel....

 With setting screws for centring. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Weight 2.1 kg.

 Pneumatic chuck for permanent mounting on the machine spindle. Required drawbar 3R-605.1 Required air pressure 6±1 bar. Air-blast cleaning of Z-references. Turbo lock...

 For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6. Required drawbar 3R-605.1 or 3R-605.4 Fixed index positions 4x90° T...

   Pneumatic chuck for mounting directly on the machine spindle.  Note: When ordering state machine make and type. Note: X/Y/Z references of hardened and ground steel,...

 Pneumatic chuck for mounting directly on the machine spindle. Note: X/Y/Z references of hardened and ground steel, largerZ-references. Note: When ordering state machi...

 Two ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct ...

System 3R 3R-600.24-S, Manual chuck, MacroStandard Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine t...

 Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488. Tightening torqu...

 Pneumatic chuck for permanent mounting on the machine table. Drawbar 3R-605.2RS included Required air pressure 6±1 bar Fixed index positions 4x90° Rust resistant Weig...

Pneumatic chuck for permanent mounting on the machine spindle. Required drawbar 3R-605.1 Required air pressure 6±1 bar. Air-blast cleaning of Z-references. Turbo locki...

 System 3R 3R-600.24-4RS, Manual chuck, Macro High Performance Chuck for Macro holder. Mounts on a suitable fixture. Required drawbar 3R-605.2RS Fixed index positions...

Cast chuck with mounting flange for mounting on the machine spindle or in a fixture. Tightening torque 6 Nm Required drawbar 3R-605.2 Fixed index positions 4x90° Flush...

 System 3R 3R-600.24RS, Manual chuck, MacroHigh Performance Manual chuck designed for permanent mounting. Tightening torque 6 Nm Required drawbar 3R-605.2RS Fixed ind...

Chuck adapter for mounting Macro holders 90º in the Macro system. Supplied with drawbar 3R-605.5RS Fixed index positions 4x90º Clamping force 6000 N Ready for code car...

 Chuck adapter, stainless steel, for MacroJunior holders in the Macro system. Axial locking screw. Fixed index positions 3x120° and 4x90º Clamping force 6000 N Weight ...

Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...

 Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 2x90º. Weight 2.5 kg.

 Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 4x90º. Weight 1.6 kg.

Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system. Fixed index positions 3x120°. Clamping force 6000 N. Weight 1.8 kg.

Chuck adapter with lever for Macro holder in the WEDM system. Supplied with drawbar.Note: When mounted on the reference element, the two clamping jaws must be tightene...

Pneumatic chuck for Macro or MacroTwin. Horizontal mounting on the machine table. Supplied with two drawbars 3R-605.10 and protective covers.Note: On automatic changin...

  Manual chuck for Macro holder. Supplied with drawbar 3R-605.26. Tightening torque 6 Nm Clamping force 6000 N Fixed index positions 4x90º Weight 1.1 kg.

Pneumatic chuck for Macro holder. Required drawbar 3R-605.1RS Clamping force 6000 N. Fixed index positions 4x90° Air-blast cleaning of Z-references Weight 4.1 kg.

Manual chuck with lever for Macro holder. Supplied with drawbar 3R-605.27RS. Clamping force 6000 N Built-in latch function Fixed index positions 4x90° Weight 1.1 kg.

For mounting on the machine spindle or on a machine table. Immersible Maximum electrode weight 500 kg Mechanical locking Weight 5 kg.

Three ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct...

Check mandrel with ground C-reference. Measuring length 50 mm Weight 0.6 kg.

For colles ER16 Electrode sizes 0.5-10 mm Building-in height 59.5 mm Weight 0.2 kg.

For collets ETS10 Electrode sizes 0.1-2 mm Building-in heigth 47 mm Weight 0.1 kg.

For mounting on a lathe taper.Note: When ordering a lather taper, use attached order form. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 1.8 kg

For mounting on the machine spindle or in a fixture on the machine table. Required drawbar 3R-405.11 Required air pressure 6±1 bar Fixed index positions 3x120° Air-bla...

 For mounting on machine spindle. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 0.8 kg

 For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture. Required drawbar...

Chuck in HighPerformance version. Five ground surfaces for vertical or horizontal mounting on the machine table. Required drawbar for Macro holder 3R-405.16 Required d...