Sinker EDM Tooling

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.2 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 2 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-A34312-M110 Adapter plate Matrix110 SP shipped and sold by System 3R

System 3R 3R-USHS047 Three Jaw Scroll Chuck Stainless Cap. ID .95-5.03" OD .03-5.27" on Macro Pallet shipped and sold by System 3R

Three ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct...

Check mandrel with ground C-reference. Measuring length 50 mm Weight 0.6 kg.

For clamping round workpieces 25-160 mm in the Macro system. Hardened. Rust-resistant. Recommended maximum workpiece weight 12 kg. Weight 5.5 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

Chuck adapter for Macro holders in the WEDM system. Supplied with drawbar 3R-605.5RS. Fixed index positions 4x90º. Clamping force 6000 N. Weight 1.9 kg.

Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system. Fixed index positions 3x120°. Clamping force 6000 N. Weight 1.8 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-USHS015 Magnet 6" x 6" for High Speed Milling on Macro Pallet - X/Y/Z Are Controlled Dims. Shipped and sold by System 3R

Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-696-110 Matrix110 Control rod shipped and sold by System 3R

For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 80 mm Weight 1.6 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-681.2424-M6A Macro Magnum 240mm Sq. Aluminum Pallet w/M6 threaded holes - for Automation Shipped and sold by System 3R

Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permissible press load 160 ton Permissible torque 570 Nm R...

System 3R 3R-SP26756 Pneum chuck, square, Macro XXX EXPIRED shipped and sold by System 3R

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMagnum 156 Pallet with MaxxMacro 54 Multi 4 QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM s...

For horizontal mounting of MacroJunior holders in the Macro system. Screw locking. Adapted for automatic changing Rust-resistant Fixed index positions 3x120° Weight 2....

MaxxMacro 2328 WEDM Supervise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxDesign Exclusive ...

MaxxMacro 70 Pneumatic Table Chuck Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxD...

MaxxMacro 54 Spindle Chuck 90957 80mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Max...

Hardened with clearance holes for four fixing screws. Fixed index positions 4x90° Adapted for automatic changing Ready for code carrier Rust resistant Supplied in sets...

MaxxMacro 54 Multi 5 QuickChuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxD...

MaxxMacro 29292 WEDM SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxDesign Exclusive ...

MaxxMacro 2923D WEDM Double SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxDesign Exc...

MaxxMacro 2936HP WEDM MaxxMagnum SuperVise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. ...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-681.2424-T8A Macro Magnum 240mm Sq. Aluminum Pallet w/”T”-slots - for Automation Shipped and sold by System 3R

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

For clamping round workpieces 8-70 mm, or rectangular workpieces 10-52 mm in the Macro system. Hardened. Rust-resistant. Recommended maximum workpiece weight 8 kg. We...

For setting angular positions and for centering Macro chucks. Measuring length 100 mm Weight 1.4 kg.

Chuck adapter with lever for Macro holder in the WEDM system. Supplied with drawbar.Note: When mounted on the reference element, the two clamping jaws must be tightene...