MaxxMacro® WEDM Wire EDM Tooling

For positioning 3Ruler anywhere on the reference elements. The stops have adjusting screws for accurate alignment. Supplied in sets of two. Weight per set 0.6 kg.

  Hardened. Recommended maximum workpiece weight per stop 50 kg. Supplied in sets of 2.

For clamping thin workpieces. Hardened Clamping range 0-27 mm Supplied in sets of 4 Weight per set 0.6 kg

 Movable jaws of SuperVice design provide a wide clamping range for rectangular workpieces. Detachable Z-support tabs ensure simple setting-up. Hardened. Recommended m...

 For clamping round workpieces 8-70 mm, or rectangular workpieces 10-52 mm in the Macro system. Hardened. Rust-resistant. Recommended maximum workpiece weight 8 kg. We...

 Vice for mounting rectangular workpieces up to 25 mm in the Mini system. Rust-resistant. Tightening torque 3 Nm. Weight 0.4 kg.

 For horizontal mounting of SuperVice and holders in vertical Macro chucks. Adjustable in three axes. Weight 1.5 kg.

 For horizontal clamping SuperVice and holders in vertical Macro chucks.Weight 1.4 kg.

3R-201J, Adapter 90°3R-204, Height adapter3R-602.27-1, Manual chuck for Macro3R-605.27RS, Drawbar3R-333-05, Allen key, 5 mm

 For clamping round workpieces 25-160 mm in the Macro system. Hardened. Rust-resistant. Recommended maximum workpiece weight 12 kg. Weight 5.5 kg.

Chuck adapter for mounting Macro holders 90º in the Macro system. Supplied with drawbar 3R-605.5RS Fixed index positions 4x90º Clamping force 6000 N Ready for code car...

 Chuck adapter, stainless steel, for MacroJunior holders in the Macro system. Axial locking screw. Fixed index positions 3x120° and 4x90º Clamping force 6000 N Weight ...

Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...

Manual block for Macro holder. Vertical or horizontal mounting on the machine table, or alternatively the WEDM system with the aid of 3R-SP6435. Required drawbar 3R-60...

 Vice for mounting rectangular workpieces 0-80 mm in the Macro system. Movable jaws for centred mounting. Can be supplemented with insert 16115-00 for mounting round w...

 Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 2x90º. Weight 2.5 kg.

 Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 4x90º. Weight 1.6 kg.

Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system. Fixed index positions 3x120°. Clamping force 6000 N. Weight 1.8 kg.

Manual chuck with dual hydraulic chambers for Mini holders. Vertical or horizontal mounting in the WEDM system. Fixed index positions 4x90º. Weight 1.9 kg.

 Vice for mounting rectangular workpieces 0-25 mm in the Macro system. Rust-resistant. Tightening torque 3 Nm. Weight 0.6 kg.

Adapter element for mounting 3R-217-1 in the WEDM system.

For mounting four workpieces Ø5-13 mm at the same time. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system. Tightening torque 3 Nm. Weight 0.6 kg.

Chuck adapter for Macro holders in the WEDM system.  Supplied with drawbar 3R-605.5RS. Fixed index positions 4x90º. Clamping force 6000 N. Weight 1.9 kg.

For clamping workpieces up to 17 mm. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or rulers in the 3Ruler system. Tightening torque 3 Nm Weight 0.5 kg.

For clamping workpieces up to 100 mm. Tightening torque 7 Nm. Weight 0.7 kg.

Can be supplemented with 3Ruler accessories.Note: Mounts on an HP mounting head.Weight 3 kg.

For mounting 3R-294.1, 3R-294.2 and 3R-294.6 on a levelling adapter.Weight 0.6 kg.

For clamping workpieces up to 50 mm. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system or Macropallet 54x54 mm. Tightening torque 3 Nm. Weight 1....

Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm. Recommended maximum workpiece weight 7 kg. Tightening torque 4 Nm. Weight 2.3 kg.

Chuck adapter with lever for Macro holder in the WEDM system. Supplied with drawbar.Note: When mounted on the reference element, the two clamping jaws must be tightene...

For fixture, workpiece or 3R-239.2, 3R-239.3, 3R-294.1, 3R-294.2, 3R-294.6 and 3R-402.1.Weight 0.6 kg.

For clamping a workpiece or fixture on a mounting head. Can be supplemented with 3Ruler accessories.Weight 3 kg.

Vice with solid jaws for clamping rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 15 Nm Weight 2.8 kg.

Vice with solid jaws for clamping rectangular workpieces up to 100 mm. Tightening torque 8 Nm Weight 1.1 kg.

Vice for clamping round workpieces 8-90 mm. Recommended maximum workpiece weight 7 kg Tightening torque 8 Nm Weight 1.7 kg.

  For vertical or horizontal collision-free clamping of round workpieces (Ø 3-15 mm). Alternatively, rotate the movable jaw and use as a regular 3R-292.3 vice for rect...

For clamping rectangular workpieces up to 77 mm. Tightening torque 3 Nm Weight 0.6 kg.

  For clamping rectangular workpieces up to 100 mm. Tightening torque 3 Nm Weight 0.9 kg.

Holder for round workpieces 8-100 mm, or rectangular workpieces up to 100 mm. Recommended maximum workpiece weight 7 kg. Tightening torque 3 Nm Weight 1.5 kg.

Vice for clamping rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 10 Nm Weight 2.7 kg.

For round workpieces15-150 mm diameter, or rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin mounting head. Recommended maximum workpiece wei...

Vice for clamping rectangular workpieces up to 155 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 15 Nm Weight 2.8 kg.