Products

For clamping workpieces up to 50 mm. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system or Macropallet 54x54 mm. Tightening torque 3 Nm. Weight 1....

For clamping workpieces up to 100 mm. Tightening torque 7 Nm. Weight 0.7 kg.

For mounting four workpieces Ø5-13 mm at the same time. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system. Tightening torque 3 Nm. Weight 0.6 kg.

System 3R 3R-294.7 Econo Multi holder Shipped and sold by System 3R

System 3R 3R-3.321-2 Indicating spindle, Mini Shipped and sold by System 3R

System 3R 3R-301 Clip, 10 pcs, Mini Shipped and sold by System 3R

System 3R 3R-310EE Electrode holder Ø50, 10 pcs, Mini Shipped and sold by System 3R

System 3R 3R-311.2 Mini Collet Holder (ER20) Collets not included Shipped and sold by System 3R

System 3R 3R-311.2-00 Mini Collet Holder Kit, complete w/12 pcs. ER20 Collets Shipped and sold by System 3R

System 3R 3R-311.3 Mini Collet Holder (ER16).Collets not included Shipped and sold by System 3R

System 3R 3R-311.4 Three-jaw chuck, Mini Shipped and sold by System 3R

System 3R 3R-314.2 Control ruler, Mini Shipped and sold by System 3R

System 3R 3R-321-4X90 Manual lathe chuck, Mini Shipped and sold by System 3R

System 3R 3R-321-EXH-SP10 Measuring Tool 10mm Ball Shipped and sold by System 3R

System 3R 3R-321.2-4X90 Mini Lathe Chuck Shipped and sold by System 3R

System 3R 3R-321.46 MiniBlock Shipped and sold by System 3R

System 3R 3R-321.5 Manual chuck, Mini Shipped and sold by System 3R

System 3R 3R-322/100 Electrode holder Ø20 mm, 10 pcs. Shipped and sold by System 3R

System 3R 3R-322/25S Electrode holder Ø20 mm, 30 pcs. Shipped and sold by System 3R

System 3R 3R-322/50 Mini Electrode Holder 50mm for AEC (set of 10) Shipped and sold by System 3R

System 3R 3R-322/50E Mini Electrode Holder 50mm for AEC (set of 30) Shipped and sold by System 3R Electrode holder for the Mini system, with 50 mm long unhardened elec...

3 mm Supplied in sets of 10 pcs.

System 3R 3R-333-03S Wrench 3mm Hex "T" Handle - (1 pc) Shipped and sold by System 3R

5 mm Supplied in sets of 10 pcs.

System 3R 3R-333-05S Wrench 5mm Hex "T" Handle (1 pc) Shipped and sold by System 3R

System 3R 3R-333-T20, TORX Screwdriver Shipped and sold by System 3R For screws 3R-PI4.5x20E and 3R-PI4.5x25E.

 For mounting on machine spindle. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 0.8 kg

For mounting on a lathe taper.Note: When ordering a lather taper, use attached order form. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 1.8 kg

 For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture. Required drawbar...

Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...

System 3R 3R-403 Soldering kit, Mini Shipped and sold by System 3R

For soldering electrode blanks on 3R-491E or 3R-SP19269. Supplied with flux. Supplied in sets of 100.

System 3R 3R-405.11 Drawbar, Junior Shipped and sold by System 3R

Drawbar Ø15 mm to mount MacroJunior holders in chucks 3R-400.XX and 3R-460.XX. Supplied in sets of 10.

System 3R 3R-405.16 Drawbar Shipped and sold by System 3R

Drawbar Ø15 mm to mount Macro holders in chucks 3R-460-XX.Supplied in sets of 10.

Drawbar Ø14x24 mm Rust-resistant Supplied singly

For setting angular positions and for centring.Measuring length 60 mm.

Check mandrel with ground C-reference. Measuring length 50 mm Weight 0.6 kg.

For horizontal mounting of MacroJunior holders in the Macro system. Screw locking. Adapted for automatic changing Rust-resistant Fixed index positions 3x120° Weight 2....

For mounting on the machine spindle or in a fixture on the machine table. Required drawbar 3R-405.11 Required air pressure 6±1 bar Fixed index positions 3x120° Air-bla...