Products

Style Steel, hardened and ground finish, with screws,15 mm centering shape

Style Steel, hardened and ground finish, with screws,15 mm centering shape

Style Steel, hardened and ground finish, engraved surface 25 mm

Style Steel, hardened and ground finish, with screws,15 mm centering shape

Erowa ER-003838 Jaw (50-75), 1 Piece Shipped and sold by Erowa

Erowa ER-003839 Jaw (0-50), 1 Piece Shipped and sold by Erowa

Erowa ER-006326 Sensor Probe Repair Ring Shipped and sold by Erowa

Style Can be ordered individually. Clamp range for each collet:ø 2.5 mm = 0.5 mmø 3 to 20 mm = 1 mmUse Round bar clamp from ø 2 mm to ø 20 mm

Erowa ER-006701 Collet chuck ø 3mm Shipped and sold by Erowa

Erowa ER-006702 Collet chuck ø 4mm Shipped and sold by Erowa

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

Erowa ER-006715 Collet chuck ø 17mm Shipped and sold by Erowa

Erowa ER-006716 Collet chuck ø 18mm Shipped and sold by Erowa

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

VersionDelivered separately, clamping range per collet chuck:ø 2.5 mm = 0.5 mmø 3-20 mm = 1 mmApplicationRound material from ø 2 mm to ø 20 mm.

Erowa ER-006929 Chuck RSM 50 on Stand, PreSet UnoSet Shipped and sold by Erowa

Erowa ER-007014 Plate 100mm Inox for SW 13 100mm Inox, 1 Piece Shipped and sold by Erowa

Erowa ER-007521 Rapid-action chuck automatic Shipped and sold by Erowa

Style For jet connection, clamping force 2500 N

Style ø 110 mm with flange, maximum clamping force 2500 N

Style NSF = Reclamp (increasing clamping force to 7,000 N)Connection Air valve on the side, a jet from the back

Style Standard type, G angle plateNSF = Reclamp (increasing clamping force to 7,000 N)Connection Processing liquid can be jetted through an air valve and chucking plug...

Erowa ER-007693 Screw Chuck 100 Shipped and sold by Erowa

Style Height 20 mm, system size 50 for holderConnection Central jet possible

Erowa ER-007754 Chucking Spigot F/A Inox (w/o flushing), Set of 1 Shipped and sold by Erowa

Erowa ER-007816 Supporting Foot SW8 M5 x 16, Set of 1 Shipped and sold by Erowa

Style With automatic clamp / air valveUse Automatic / manual loading of ITS tooling

Style Manual clampUse Manual loading of ITS touring

Style Clamp part only

Style Chuck 50, manual, with ITS base plate360 ° continuous rotationUse An ITS jig for tilting and machining workpieces at any angle. ITS chuck is a manual base

Clamp range From 0 to 100 mmUse 360 ° stepless rotationwith 3 sets of clamp jaws

Erowa ER-007962 UnoSet Kit Shipped and sold by Erowa

Style Fixed type, for automatic replacement, set of 20 stainless bolts without jet holes.

Erowa ER-007990 DiaFix Shipped and sold by Erowa

Erowa ER-008030 Clamping chuck 100 RSA Shipped and sold by Erowa

Erowa ER-008038 Gripper Support 5.35° Shipped and sold by Erowa