System 3R Tooling

For pallet 70x70 mm.Suitable for some Macro chucks.Note: For more info please ask System 3R.

Suitable for some Macro chucks with drawbar 3R-605.2.Note: For more info please ask System 3R.

For pallet Ø 75 mm.Suitable for some Macro chucks. Note: For more info please ask System 3R.

For pallet 70x70 mm.suitable for some Macro chucks.Note: For more info please ask System 3R.

Suitable for some Macro chucks with drawbar 3R-605.2.Note: For more info please ask System 3R.

Suitable for some Macro chucks with drawbar 3R-605.1.Note: For more info please ask System 3R.

Suitable for some Macro chucks with drawbar 3R-605.1.Note: For more info please ask System 3R.

For setting angular positions and for centring Macro chucks. Ground hole for centring. Measuring length 100 mm Weight 1.4 kg.

Check mandrel with ground C-reference for setting Macro chucks. Measuring length 110 mm Weight 2.3 kg.

Ø20x13 mm Rust resistant Supplied 1 pc.

Ø20x13 mm Rust resistant Supplied in sets of 20 pcs.

Ø20x57 mm with flushing holes Ø7 mm Intended for MacroCombi automatic electrode changers. Supplied in sets of 10 pcs.

Ø20x13 mm Rust resistant Supplied in sets of 20 pcs.

For centring 3R-600.20.

Hardened, with 3Refix holes and clearance holes for ten fixing screws. 3Refix Ø10 mm Adapted for automatic changing Ready for code carrier Parallel-ground top and bot...

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck. Adapted f...

Hardened, with clearance holes for four fixing screws. Adapted for automatic changing Ready for code carrier Fixed index positions 4x90° Rust-resistant Flushing duct ...

Unhardened pallet with 3Refix hols and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52. 3Refix Ø10 mm Building-in height 14.2 mm Supplied in sets of ...

Ø20x36.2 mm with flushing holes Ø7 mm Rust resistant Supplied in 1 pc.

Unhardened palett with reference element 3R-651.75-P. X, Y & Z-references hardened Ready for code carrier Ready for automation

For horizontal mounting of Mini holders in the Macro system. Rust-resistant Flushing connection Weight 1.9 kg.

Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.10 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 1 kg.

Pneumatic chuck for horizontal or vertical use. Required drawbar 3R-605.1 or 3R-605.4 References of cemented carbide Required air pressure 6±1 bar Fixed index positio...

Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.2 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 2 kg.

For vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Fixed index positions 24x15° Vernier scale Weight 5.5 kg.

Pneumatic chuck locked/opened with air gun. Required drawbar 3R-605.1 or 3R-605.4 All references of hardened and ground steel Required air pressure 6±1 bar Fixed index...

Manual vibration-damped chuck, Ø170 mm. Required drawbar 3R-605.2 Tightening torque 6 Nm Building-in height 85 mm. Centre spacing 63 to 100 mm Weight 6 kg.

Pneumatic chuck for mounting directly on the machine spindle. Note: When ordering state machine make and type.Note: X/Y/Z references in hardened and ground steel....

With setting screws for centring. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Weight 2.1 kg.

Pneumatic chuck for permanent mounting on the machine spindle. Required drawbar 3R-605.1 Required air pressure 6±1 bar. Air-blast cleaning of Z-references. Turbo lock...

For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6. Required drawbar 3R-605.1 or 3R-605.4 Fixed index positions 4x90° T...

Pneumatic chuck for mounting directly on the machine spindle. Note: When ordering state machine make and type. Note: X/Y/Z references of hardened and ground steel,...

Pneumatic chuck for mounting directly on the machine spindle. Note: X/Y/Z references of hardened and ground steel, largerZ-references. Note: When ordering state machi...

Two ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct ...

Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488. Tightening torqu...

Pneumatic chuck for permanent mounting on the machine spindle. Required drawbar 3R-605.1 Required air pressure 6±1 bar. Air-blast cleaning of Z-references. Turbo locki...

System 3R 3R-600.24-4RS, Manual chuck, Macro High Performance Chuck for Macro holder. Mounts on a suitable fixture. Required drawbar 3R-605.2RS Fixed index positions...

Cast chuck with mounting flange for mounting on the machine spindle or in a fixture. Tightening torque 6 Nm Required drawbar 3R-605.2 Fixed index positions 4x90° Flush...

System 3R 3R-600.24RS, Manual chuck, MacroHigh Performance Manual chuck designed for permanent mounting. Tightening torque 6 Nm Required drawbar 3R-605.2RS Fixed ind...

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck. Adapted...

Drawbar Ø20x57,1 mm with flushing hole Ø7 mm Rust-resistant Supplied singly

Drawbar Ø20x32 mm Rust-resistant Supplied singly.

Drawbar Ø20x27 mm Rust-resistant Supplied singly.

Drawbar Ø20x19 mm Rust-resistant Supplied singly.

Unit for operating pneumatic chucks in B-.axes. Two functions - opoen/closed with four seconds delay for air-blast cleaning.