System 3R Tooling

System 3R 3R-659.32-P Macro Collet Holder for ER32 Collets Shipped and sold by System 3R

System 3R 3R-659.20-P Macro Collet Holder for ER20 Collets Shipped and sold by System 3R

System 3R 3R-659.16-P Macro Collet Holder for ER16 Collets Shipped and sold by System 3R

System 3R 3R-658.4-S Macro Electrode Holder - Box - for 3R-651.7E-XS & 3R-651E-LS (1 single pc) Shipped and sold by System 3R

System 3R 3R-658.2-S Macro Electrode Holder - Slotted - for 3R-651.7E-XS & 3R-651E-LS (1 single pc) Shipped and sold by System 3R

System 3R 3R-651-P Macro Electrode Holder - Cast stainless Shipped and sold by System 3R

System 3R 3R-651.7-XS Low Cost Macro Standard Pallet - unplated 54X54X12.5mm (single piece) Shipped and sold by System 3R

System 3R 3R-651.7-S Low Cost Macro Standard Pallet - nickel plated 54X54X12.5mm (Single Piece) Shipped and sold by System 3R

System 3R 3R-651.7-P Pallet 54x54 mm, 1 pc, Macro Shipped and sold by System 3R

System 3R 3R-651.75-P Pallet Ø75 mm, Macro Shipped and sold by System 3R

System 3R 3R-628.42 Holder 54x54 mm, Macro Shipped and sold by System 3R

System 3R 3R-628.28-S User kit, Macro Shipped and sold by System 3R

System 3R 3R-628.24-S User kit, Macro Shipped and sold by System 3R

System 3R 3R-618.1 Magazine fork Macro Shipped and sold by System 3R

Hardened pallet with clearence holes for fixing screws.Note: Must be mounted on the workpiece/fixture before it is locked in a chuck. Rust-resistant Weight 1 kg.

 Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permissible press load 160 ton Permissible torque 570 Nm R...

 Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 24000 N Permissible torque 600 Nm ...

 Note: Extreme repetition accuracy within 0.0007 mm.Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permiss...

  Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 12000 N Permissible torque 300 Nm...

Check ruler for setting flatness and angular positions. Ground hole for centering. Adapted fro automatic changing. Ready for code carrier Measuring length 130 mm Weigh...

Manual vibration-damped (VDP) table chuck. Required drawbar 3R-605.2 Recommended tightening torque: Macro pallet 4 Nm Recommended tightening torque: MacroMagnum pallet...

 Unhardened pallet with hardened references and hole markings for eight clearance holes. Adapted for automatic changing Ready for code carrier Weight 4.5 kg.

 Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 16000 N Permissible torque 600 Nm ...

 Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 9000 N Permissible torque 100 Nm R...

 Chuck adapter with built-in pneumatic Macro chuck for mounting in 90724.Weight 4.5 kg

 Note: Extreme repetition accuracy within 0.0007 mm.Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permiss...

 Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permissible press load 210 ton Permissible torque 570 Nm R...

 Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permissible press load 80 ton Permissible torque 570 Nm Re...

Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 18500 N Permissible torque 600 Nm R...

 Including:3R-680.24-S, MacroMagnum chuck, Manual, Low profile3R-681.51-SA, MacroMagnum Pallet Ø156 mm, 4 pcs.3R-605.2, Drawbar, 2 pcs.

For dia. 156 mm pallets, prepared for automation only. Suitable for: 3R-681.51, 3R-681.51-SA and 3R-681.156-A. Weight 1 kg.

     Chuck for permanent mounting on the machine table or into a PM press.Note: Extreme repetition accuracy within 0.0007 mm. Fixed index positions 4x90° Hardened ref...

 For permanent mounting on the machine spindle or table.Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation. Required drawbar 3R-605.2. Recommended...

 Chuck for permanent mounting on the machine table or into a PM press.Note: Extreme repetition accuracy within 0.0007 mm. Fixed index positions 4x90° Hardened referenc...

Hardened with clearance holes for four fixing screws. Fixed index positions 4x90° Adapted for automatic changing Ready for code carrier Rust resistant Supplied in sets...

 Hardened and precision-cast, with clearance holes for four fixing screws. Fixed index positions 4x90° Adapted for automatic changing Parallel-ground top and bottom fa...

 Pneumatic chuck for machine spindles and lathes. Opened/locked by an air gun against a valve on the side, or alternatively on the back, of the chuck. Required drawbar...

 Pneumatic table chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of the Z-references Sealing ...

 Pneumatic table chuck for chuck adapter. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of Z-refer...

Hardened and milled with clearance holes for eight fixing screws. Fixed index positions 4x90° Parallel-ground top and bottom face Adapted for automatic changing Rust r...

 For eight electrodes 52x52 and 54x54 mm.Supplied in sets of 5.

 Check mandrel with ground C-reference for setting Macro chucks. Measuring length 38 mm Weight 1 kg.

 Measuring probe with measuring head for machines with measurement cycle function. Building-in height 130 mm Measuring ball Ø3 mm Stiff probe Weight 0.8 kg.

Measuring probes with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10°, Y-Axis ±10°, Z-Axis ±3 mm Building-in hei...

 For measuring centre holes Dial indicator required Weight 0.6 kg.

Hardened holder for square electrodes max 50 mm. Max. workpiece: 32x28 mm Adapted for automatic changing Parallel-ground top and bottom faces Fixed index positions 4x9...

Contents:3R-465.1-A, Holder with MacroJunior taper, 4 pcs.3R-461.1-GA, Holder with MacroJunior journal, 2 pcs.3R-466.4033, Chuck adapter Macro/MacroJunior.3R-466.10033...

Contents:3R-605.1, Drawbar, long, 4 pcs.3R-605.2, Drawbar, short, 2 pcs.3R-610.21-S, Manual table chuck, Macro.3R-651.7-S, Pallet, 54x54 mm, Macro, 12 pcs.3R-656.1, Ch...