No products in the cart.
Chuck adapter for mounting Macro holders 90º in the Macro system. Supplied with drawbar 3R-605.5RS Fixed index positions 4x90º Clamping force 6000 N Ready for code car...
Sold:
Chuck adapter, stainless steel, for MacroJunior holders in the Macro system. Axial locking screw. Fixed index positions 3x120° and 4x90º Clamping force 6000 N Weight ...
Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...
Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 2x90º. Weight 2.5 kg.
Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 4x90º. Weight 1.6 kg.
Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system. Fixed index positions 3x120°. Clamping force 6000 N. Weight 1.8 kg.
Chuck adapter for Macro holders in the WEDM system. Supplied with drawbar 3R-605.5RS. Fixed index positions 4x90º. Clamping force 6000 N. Weight 1.9 kg.
Chuck adapter with lever for Macro holder in the WEDM system. Supplied with drawbar.Note: When mounted on the reference element, the two clamping jaws must be tightene...
Pneumatic chuck for Macro or MacroTwin. Horizontal mounting on the machine table. Supplied with two drawbars 3R-605.10 and protective covers.Note: On automatic changin...
Manual chuck for Macro holder. Supplied with drawbar 3R-605.26. Tightening torque 6 Nm Clamping force 6000 N Fixed index positions 4x90º Weight 1.1 kg.
Pneumatic chuck for Macro holder. Required drawbar 3R-605.1RS Clamping force 6000 N. Fixed index positions 4x90° Air-blast cleaning of Z-references Weight 4.1 kg.
Pneumatic chuck for Macro holders. Supplied with drawbar 3R-605.10 and protective cover.Note: The pneumatic chuck require an air pressure of 6±1 bar. Clamping force ...
Manual chuck with lever for Macro holder. Supplied with drawbar 3R-605.27RS. Clamping force 6000 N Built-in latch function Fixed index positions 4x90° Weight 1.1 kg.
For mounting on the machine spindle or on a machine table. Immersible Maximum electrode weight 500 kg Mechanical locking Weight 5 kg.
Three ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct...
Check mandrel with ground C-reference. Measuring length 50 mm Weight 0.6 kg.
For colles ER16 Electrode sizes 0.5-10 mm Building-in height 59.5 mm Weight 0.2 kg.
For collets ETS10 Electrode sizes 0.1-2 mm Building-in heigth 47 mm Weight 0.1 kg.
For mounting on a lathe taper.Note: When ordering a lather taper, use attached order form. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 1.8 kg
For mounting on the machine spindle or in a fixture on the machine table. Required drawbar 3R-405.11 Required air pressure 6±1 bar Fixed index positions 3x120° Air-bla...
For mounting on machine spindle. Required drawbar 3R-405.11 Fixed index positions 3x120° Weight 0.8 kg
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture. Required drawbar...
Chuck in HighPerformance version. Five ground surfaces for vertical or horizontal mounting on the machine table. Required drawbar for Macro holder 3R-405.16 Required d...
The locking mechanism is operated by a removable handle. Required drawbar for Macro holder 3R-405.16 Required drawbar for MacroJunior holder 3R-405.11 Weight 4.5 kg.
Pneumatic chuck for mounting directly on the machine spindle. All X/Y/Z references in hardened and ground steel.Note: When ordering state machine make and type. Six M6...
Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table. Required drawbar 3R-405.11 Fixed index positions 3x12...
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture. Required drawbar ...
Pneumatic chuck for mounting directly on the machine spindle. All X/Y/Z references in hardened and ground steel.Note: When ordering state machine make and type. Four M...
For horizontal mounting of MacroJunior holders. Screw locking.Note: For EDM machining only. Fixed index positions 3x120° Weight 0.6 kg.
Pneumatic chuck for mounting on machine spindle with 3R-A3620. Required drawbar for Macro holder 3R-405.16 Required drawbar for MacroJunior holder 3R-405.11 Required a...
Pneumatic chuck for mounting directly on the machine spindle. MacroJunior references offset 90°. All X/Y/Z references in hardened and ground steel.Note: When ordering ...
Pneumatic chuck with integral air unit. Required drawbar for Macro holder 3R-405.16 Required drawbar for MacroJunior holder 3R-405.11 Required air pressure 6±1 bar Air...
For mounting on a lathe taper Required drawbar for Macro holder 3R-405.16 Required drawbar for MacroJunior holder 3R-405.11 Weight 2.0 kg.
Page 8 of 8
to add multiple items to your quote, please fill qty field then click on "add to quote"