No products in the cart.
For Automation Dimensions: Ø99 x 22 mm Mounting: 6x M6 screws (fits on flange C188730) Releasing: pneumatic, 6 bar Required air pressure: 6 bar Z-supports cleaning: yes
Sold:
For permanent mounting on the machine table. Supplied with drawbar 3R-605.2 Required air pressure 6 ±1 bar Fixed index positions 4x90º Flushing duct Air-blast clean...
Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 24000 N Permissible torque 600 Nm ...
Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 12000 N Permissible torque 300 Nm...
Manual vibration-damped (VDP) table chuck. Required drawbar 3R-605.2 Recommended tightening torque: Macro pallet 4 Nm Recommended tightening torque: MacroMagnum pallet...
Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 16000 N Permissible torque 600 Nm ...
Pneumatic chuck with coarse guiding of the pallet.Intended for permanent building-in. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed ind...
Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 9000 N Permissible torque 100 Nm R...
Chuck adapter with built-in pneumatic Macro chuck for mounting in 90724.Weight 4.5 kg
From MacroMagnum into Macro system. Chuck adapter with built-in Macro chuck. Requires drawbar 3R-605.2 or similar. Solid X & Y-References Recommended clamping torq...
Chuck for permanent mounting on the machine table or into a PM press. Fixed index positions 4x90° Hardened references Locking force 18500 N Permissible torque 600 Nm R...
Chuck for permanent mounting on the machine table or into a PM press.Note: Extreme repetition accuracy within 0.0007 mm. Fixed index positions 4x90° Hardened ref...
For permanent mounting on the machine spindle or table.Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation. Required drawbar 3R-605.2. Recommended...
Chuck for permanent mounting on the machine table or into a PM press.Note: Extreme repetition accuracy within 0.0007 mm. Fixed index positions 4x90° Hardened referenc...
Pneumatic table chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of the Z-references Sealing ...
Pneumatic table chuck for chuck adapter. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of Z-refer...
Fixed index positions at 0, 30, 45, 60 and 90 degrees.Other angles are set with a sine rule.Weight 1.1 kg.
Distance adapter to extend the mache spindle. Mechanical clamping from the side. Solid X & Y-references Extension length 250 mm Ready for automation Flushing duct...
Distance adapter to extend the mache spindle. Mechanical clamping from the side. Solid X & Y-references Extension length 200 mm Ready for automation Flushing duct ...
Cast chuck with ground flange for installation in fixture/plate. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing connection Weig...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Rust-resistant. Required drawbar 3R-605.1, 3R-605.4. Required air pressure 6±1 bar...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Required drawbar 3R-605.1, 3R-605.4. Required air pressure 6±1 bar. Fixed index po...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Required drawbar 3R-605.1, 3R-605.4. Required air pressure 6±1 bar. Carbide XY-Ref...
Pneumatic vibration-damped chuck, low-profile version. Required drawbar 3R-605.10 Required air pressure 6 ±1 bar Fixed index positions 4x90º Air-blast cleaning of the ...
Two ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.1 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct W...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Carbide XY-references Required drawbar 3R-605.1 or 3R-605.4 Required air pressu...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index po...
Pneumatic built-in chuck with swivel in the back. For high RPM Machine adapted.
Pneumatic added-on chuck with swivel surrounding unit. For low RPM Machine adapted.
Replaced with part number 3R-680.24RS Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD requir...
Chuck for Macro holder. For permanent mounting on the machine spindle or fixure. Required drawbar 3R-605.1RS Clamping force 6000 N Fixed index positions 4x90° Weight 2...
Built-up height: 52 mm Air connections positioned centrally on the underside– prism – Z-cleaning – clamping/releasing – Turbo/ventilation Clamping force: 30 000 N/80 ...
Pneumatic table chuck with 3Refix-holes. 3Refix Ø20 mm Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleani...
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis. Required drawbar for Macro holder 3R-405.16 Required drawbar for MacroJunior holder...
Stainless steel chuck with ground flange Ø22x6 mm for mounting in a fixture or in Wire EDM system. Axial locking screw with channel for flushing through the electrode....
System 3R 3R-680.1-2V Pneumatic Magnum VDP chuck Shipped and sold by System 3R
System 3R 3R-602.81RS-N Pneumatic chuck, low, Macro Nano Shipped and sold by System 3R
System 3R 3R-602.10-1N Low-profile pneum. Macro chuck Nano Shipped and sold by System 3R
System 3R 3R-610.46 Pneumatic table chuck 90°, Macro Shipped and sold by System 3R
System 3R 3R-602.12-1K MacroWEDM Twin Chuck (replaces 602.12(HP)) w/ 2 605.10 & US611.1 air control Shipped and sold by System 3R
System 3R 3R-602.10-1K MacroWEDM Chuck (replaces 602.10(HP)) w/ 605.10 & US611.1 air control Shipped and sold by System 3R
System 3R 3R-600.86-1 Pneumatic chuck, Macro Shipped and sold by System 3R
System 3R 3R-600.86 Pneumatic chuck, square OEM, Macro Shipped and sold by System 3R
System 3R 3R-600.83 Pneumatic chuck, round OEM less Turbo Shipped and sold by System 3R
System 3R 3R-600.23RS Manual flange chuck Macro RS Shipped and sold by System 3R
System 3R 3R-600.1-30 Pneumatic chuck, universal, Macro Shipped and sold by System 3R
System 3R 3R-600.1-3 Pneumatic chuck, universal, Macro Shipped and sold by System 3R
Page 6 of 8
to add multiple items to your quote, please fill qty field then click on "add to quote"