Sinker EDM Tooling

System 3R 3R-SP26771-N Pneumatic chuck, round, Macro Nano Shipped and sold by System 3R

System 3R 3R-USHS033 3 Jaw Stainless Chuck Round-.008"-.375" cap. On Macro Shipped and sold by System 3R

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

As per supplied drawing

 Pneumatic chuck for mounting directly on the machine spindle. Note: X/Y/Z references of hardened and ground steel, largerZ-references. Note: When ordering state machi...

Chuck in HighPerformance version. Five ground surfaces for vertical or horizontal mounting on the machine table. Required drawbar for Macro holder 3R-405.16 Required d...

Hardened and milled with clearance holes for eight fixing screws. Fixed index positions 4x90° Parallel-ground top and bottom face Adapted for automatic changing Rust r...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

 For alignment of the Dynafix references. With ground reference rulers, hole and surface. Adapted for automatic changing Ready for code carrier Weight 8 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted. Adjustable in three axes. Supplied without drawbar Ad...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

 Pneumatic chuck for permanent mounting on the machine table. Drawbar 3R-605.2RS included Required air pressure 6±1 bar Fixed index positions 4x90° Rust resistant Weig...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

 Vice for mounting rectangular workpieces 0-25 mm in the Macro system. Rust-resistant. Tightening torque 3 Nm. Weight 0.6 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-USHS047 Three Jaw Scroll Chuck Stainless Cap. ID .95-5.03" OD .03-5.27" on Macro Pallet shipped and sold by System 3R

 Pneumatic chuck for permanent mounting on the machine table. Required drawbar 3R-605.2 Required air pressure 6±1 bar Fixed index positions 4x90° Weight 2 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-A34312-M110 Adapter plate Matrix110 SP shipped and sold by System 3R

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

Three ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.2 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct...

 For clamping round workpieces 25-160 mm in the Macro system. Hardened. Rust-resistant. Recommended maximum workpiece weight 12 kg. Weight 5.5 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system. Fixed index positions 3x120°. Clamping force 6000 N. Weight 1.8 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-US772-T8.40 Dynafix Pallet w/Aluminum Plate w/”T”-slots Shipped and sold by System 3R

Chuck for MacroJunior holder. Can be mounted on 3R-237.2, 3R-292.66HP, 3R-294, the 3Ruler system, or on Macro element 54x54 mm. Required drawbar 3R-405.21RS Rust-resis...

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

System 3R 3R-696-110 Matrix110 Control rod shipped and sold by System 3R

 For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 80 mm Weight 1.6 kg.

MaxxMacro WEDM MXRuler system has been developed for clamping medium-sized and large workpieces in machines with a parallel or U-shaped machine table, as well as for m...

MaxxMagnum 156 Pallet with MaxxMacro 54 Multi 4 QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro O...

System 3R 3R-681.2424-M6A Macro Magnum 240mm Sq. Aluminum Pallet w/M6 threaded holes - for Automation Shipped and sold by System 3R

 Note: Not self carrying, requires extra support. Adapted for automatic changing Fixed index positions 4x90° Permissible press load 160 ton Permissible torque 570 Nm R...

System 3R 3R-USHS015 Magnet 6" x 6" for High Speed Milling on Macro Pallet - X/Y/Z Are Controlled Dims. Shipped and sold by System 3R

MaxxMacro 2328 WEDM Supervise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. MaxxDesign Exclusive ...