GPS 70/120, Accessories

With pre-programmed unique identity,designed for GPS 240 pallets. Suitable to fixture C960740

With pre-programmed unique identity,designed for GPS 240 pallets.  Suitable to fixture C960740 Sets of 10 pieces

The chuck seal is a wear part which should be replacedevery three to six months. Material: Viton Supplied singly

Spigot for GPS 240 chucks matching the reworked palletsin accordance with C531240.Suitable for square GPS 240 chucks.

To protect Z-references of the pallet.Supplied in sets of 20.

  Rework on GPS 240 pallets for working with an index lock.Can be used on square GPS 240 pallets.

To seal the holes in the four clamping elements of the pallet. Material: elastomer Supplied in sets of 20.

  Plugs for sealing GPS 240 pallets.Supplied in sets of 40.

For alignment of workpieces on GPS 240 pallets. Parallelism: 0.005 mm Required air pressure: 6 ±1 bar Supplied with dial indicator, dial indicator holder and actuator.

For controlling pneumatic chucksC217100, C217400 and C219000.

Unit for controlling pneumatic chucks C217100 and C219000.1 connection (clamping/releasing)

Unit for controlling pneumatic chucks C219100 and C2191104 connectionsX/Y-locating – air-blast cleaning of Z – open/lock – turbo/ventilation

Unit to control two pneumatic chucks. 5 connectionsX/Y-locating – air-blast cleaning of Z – open/lock –turbo/ventilation – ventilation tube

Contents:E 030 220 clamp (x4)E 010 144 washer M10 (x4)E 010 143 washer M8 (x4)E 000 428 Allen screw M10x45 (x4)E 000 354 Allen screw M8x45 (x4)E 040 030* T-slot nut M1...

  Contents:C 810 881 undrilled clamp strip (x2)E 010 144 washer M10 (x4)E 010 143 washer M8 (x4)E 000 428 Allen screw M10x45 (x4)E 000 354 Allen screw M8x45 (x4)E 040 ...

For mounting two chucks on 300 mm centres.Contents:C 810 921 undrilled spacer (x1)C 810 881 undrilled clamp strip (x2)E 010 144 washer M10 (x6)E 010 143 washer M8 (x6)...

Fixture for code carrier 3R-863.01-10The code carrier can be clicked into position.