Accessories

6 Nm. 

For storing MacroJunior holders in 3R-850/8x5 and 3R-150/5.Supplied in sets of 8.

 For eight electrodes 52x52 and 54x54 mm.Supplied in sets of 5.

 Check mandrel with ground C-reference for setting Macro chucks. Measuring length 38 mm Weight 1 kg.

 For setting angular positions. Ground outside diameter for centring. Measuring length 50 mm Weight 0.8 kg.

 For measuring centre holes Dial indicator required Weight 0.6 kg.

 Measuring probe with measuring head for machines with measurement cycle function. Building-in height 130 mm Measuring ball Ø3 mm Stiff probe Weight 0.8 kg.

 Measuring probes with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10°, Y-Axis ±10°, Z-Axis ±3 mm Building-in he...

Measuring probes with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10°, Y-Axis ±10°, Z-Axis ±3 mm Building-in hei...

For dia. 156 mm pallets, prepared for automation only. Suitable for: 3R-681.51, 3R-681.51-SA and 3R-681.156-A. Weight 1 kg.

Check ruler for setting flatness and angular positions. Ground hole for centering. Adapted fro automatic changing. Ready for code carrier Measuring length 130 mm Weigh...

Note: In automation the gripper has to grip on the pallet and not on the drawbar.Weight 0.5 kg.

 Note: In automation the gripper has to grip on the pallet and not on the drawbar.Weight 0.8 kg.

 Note: In automation the gripper has to grip on the pallet and not on the drawbar.Weight 1.5 kg.

 For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 80 mm Weight 1.6 kg.

 For setting flatness and angular positions.Note: Extreme repetition accuracy within 0.0007 mm. Ground hole for centering Adapted for automatic changing Ready for code...

 For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 100 mm Weight 3.4 kg.

 For setting flatness and angular positions.Note: Extreme repetition accuracy within 0.0007 mm. Ground hole for centering Adapted for automatic changing Ready for code...

For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 125 mm Weight 5.7 kg.

 For setting flatness and angular positions. Ground hole for centering Adapted for automatic changing Ready for code carrier Measuring legth 150 mm Weight 7.5 kg.

Reference kit for users who want to make their own pallets or fixtures.

 For alignment of the Dynafix references. With ground reference rulers, hole and surface. Adapted for automatic changing Ready for code carrier Weight 8 kg.

With pre-programmed unique identity, designed for Macrojunior 25 mm, 3R-491E.Supplied in sets of 10.

With pre-programmed unique identity, designed for 3Ready-to-Run, 3R-494-XX.XX.Supplied in sets of 10.

3Refix Ø10 mm Recommended tightening torque 4 Nm. Supplied in sets of 10 Nm Weigth per set 0.2 kg. Note: When positioning with 3Refix mandrels - always tighten the ex...

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 10H7 mm Outside diameter 15h6 mm Height 12 mm Supplied in sets of 30 pcs.

Hardened steel, 60 HRC, for mounting in existing fixtures. Bore 20H6 mm Outside diameter 28h6 mm Height 20 mm Supplied in sets of 10 pcs.  

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

 For Ø20 mm 3Refix mandrels (3R-901-20E).10 Nm.

Plug to protect Ø20 mm hole from dirtSupplied in sets of 50 pcs.

To protect M12 holes with protective countersinking from dirt.Supplied in sets of 50 pcs.

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S. Supplied with insulation plate and fixing screws.Flushing connection.

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Supplied with fixing screws for chuck and table.Note: Chuck to be ordered separately.

 For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling.Note: Chuck to be ordered separately.

 For mounting 3R-600.28-S

To convert 3R-600.28-S to enable long drawbar 3R-605.1.Extra height 18.5 mm.

Adapter plate with eight adjusting screws for mounting spindle chucks. Supplied with fixing screws. M10 for 90 mm pitch circle M6 for 96 mm pitch circle M8 for 100 mm ...

Supplied with marker pen. Size 12x25 mm Supplied in sets of 200 pcs.

Supplied with marker pen. Size 6x19 mm Supplied in sets of 288 pcs.

For mounting electrode blanks. Length 12 mm. Supplied in sets of 100, including a Torx screwdriver.