System 3R Magnum

System 3R 3R-681.2424-M6A Macro Magnum 240mm Sq. Aluminum Pallet w/M6 threaded holes - for Automation Shipped and sold by System 3R

System 3R 3R-680.1-3 Macro Magnum Flat Chuck - universal - requires 605.2 Drawbar Shipped and sold by System 3R

For permanent mounting on the machine table. Supplied with drawbar 3R-605.2 Required air pressure 6 ±1 bar Fixed index positions 4x90º Flushing duct Air-blast cleanin...

System 3R 3R-680.10-2RS Magnum table chuck RS Shipped and sold by System 3R

System 3R 3R-680.10-2ARS Magnum table chuck RS adapt Shipped and sold by System 3R

System 3R 3R-292.6HPK WEDM Supervise 0-6" Magnum HP Style w/Torque Wrench Shipped and sold by System 3R

System 3R 3R-292.6-8HPK WEDM Supervise 0-8" Magnum HP Style w/Torque Wrench Shipped and sold by System 3R

System 3R 3R-292.66-L-HP WEDM 3Ruler Angle Vise - Magnum - HP Shipped and sold by System 3R

System 3R 3R-292.61HPK WEDM Supervise 0-6" Magnum-HP-No Cutouts in Jaw w/Torque Wrench Shipped and sold by System 3R

Chuck adapter with built-in pneumatic MacroMagnum chuck for mounting in 3R-770-1A or 3R-700-5A.

Hardened pallet with clearence holes for fixing screws.Note: Must be mounted on the workpiece/fixture before it is locked in a chuck. Rust-resistant Weight 1 kg.

For permanent mounting on the machine table. Supplied with drawbar 3R-605.2 Required air pressure 6 ±1 bar Fixed index positions 4x90º Flushing duct Air-blast clean...

Manual vibration-damped (VDP) table chuck. Required drawbar 3R-605.2 Recommended tightening torque: Macro pallet 4 Nm Recommended tightening torque: MacroMagnum pallet...

Unhardened pallet with hardened references and hole markings for eight clearance holes. Adapted for automatic changing Ready for code carrier Weight 4.5 kg.

Chuck adapter with built-in pneumatic Macro chuck for mounting in 90724.Weight 4.5 kg

Including:3R-680.24-S, MacroMagnum chuck, Manual, Low profile3R-681.51-SA, MacroMagnum Pallet Ø156 mm, 4 pcs.3R-605.2, Drawbar, 2 pcs.

For permanent mounting on the machine spindle or table.Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation. Required drawbar 3R-605.2. Recommended...

Pneumatic chuck for machine spindles and lathes. Opened/locked by an air gun against a valve on the side, or alternatively on the back, of the chuck. Required drawbar...

Pneumatic table chuck. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of the Z-references Sealing ...

Pneumatic table chuck for chuck adapter. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleaning of Z-refer...

Can be supplemented with 3Ruler accessories.Note: Mounts on an HP mounting head.Weight 3 kg.

Vice with solid jaws for clamping rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 15 Nm Weight 2.8 kg.

Vice for clamping rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 10 Nm Weight 2.7 kg.

For round workpieces15-150 mm diameter, or rectangular workpieces up to 150 mm.Note: Mounts on HP, Magnum or MacroTwin mounting head. Recommended maximum workpiece wei...

Vice for clamping rectangular workpieces up to 155 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque 15 Nm Weight 2.8 kg.

Vice for clamping round workpieces 15-155 mm.Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Recommended maximum workpiece weight 12 kg Tightening torque 10...

For mounting Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted. Adjustable in three axes. Can be adapted to automatic changing w...

For manual mounting of Magnum holders in the MacroTwin system.Note: All holders including HP can be mounted. Can be adapted to automatic changing with 3R-W12-S. Suppli...

Replaced with part number 3R-680.24RS Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD requir...

Pneumatic table chuck with 3Refix-holes. 3Refix Ø20 mm Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6±1 bar Fixed index positions 4x90° Air-blast cleani...