Products

Please submit dimension diagram of the mounting bores Recommendation: at least 4 chucks per application• Chuck C 297 000

 Additional supports for pallets.Suitable for pallets with rings.Height H = 75 mm

Additional supports for pallets.Suitable for pallets with cups.Height H = 105 mm

 Easy operation for manual use or for direct control via the interface. Interface provided for machine signals. Including connection block and connection tubes.  Funct...

Including fixation screws

Including fixation screws

Including fixation screws

 Chip protection for Delphin BIG chucks andfor presence control on unused chucks. Material: aluminium, anodised Dimensions: ø 124 x 58 mm

 Adapter to accept Macro pallets. Material: aluminium/steel Weight: 8.5 kg.

Chuck adapter with built-in pneumatic Macro Magnum chuck for mounting in C 219 800. Built-up height 80 mm X/Y-centring with springy cams, hardened, stainless Adapted f...

Chuck adapter with built-in pneumatic GPS 120 chuck for mounting in C 219 800. Built-up height 54 mm X/Y-centring with springy cams, hardened, stainless Adapted for au...

Chuck adapter with built-in pneumatic GPS 70 chuck for mounting in C 219 800. Built-up height 54 mm X/Y-centring with springy cams, hardened, stainless Adapted for aut...

Chuck adapter with built-in pneumatic GPS 120 chuck for mounting in C 219 800. Built-up height 100 mm X/Y-centring with springy cams, hardened, stainless Adapted for a...

 Chuck adapter with built-in pneumatic GPS 70 chuck for mounting in C 219 800. Built-up height 100 mm X/Y-centring with springy cams, hardened, stainless Adapted for a...

 For milling, grinding, die-sinking EDM, presetting and measuring station. Suitable for the 5-sided machining of electrodes and workpieces. One side is ground square w...

To protect Z-references of the pallet.Supplied in sets of 20.

  Rework on GPS 240 pallets for working with an index lock.Can be used on square GPS 240 pallets.

To seal the holes in the four clamping elements of the pallet. Material: elastomer Supplied in sets of 20.

  Plugs for sealing GPS 240 pallets.Supplied in sets of 40.

 Cast aluminium pallet. Construction height: 48.1 ±0.01 mm X/Y-centring with spring-loaded pin Flatness: 0.02 mm Recommended workpiece weight: 100 kg Supplied with C53...

 High-precision magnetic plate for grinding work and for erode. Magnetic field height: 5 mm Holding force: 100 N/cm2 Dimensions: 240x240x88 mm Weight: 23 kg

 Strong magnetic plate for milling. Magnetic field height: 10 mm Holding force: 150 N/cm2 Dimensions: 240x240x96 mm Weight: 27.1 kg

Cast aluminium pallet.Suitable for high-speed milling and arduous milling operations.Prepared for automation. Construction height: 48.0 ±0.01 mm X/Y-centring: with coi...

 Cast aluminium pallet.Suitable for high-speed milling and arduous milling operations.Prepared for automation. Construction height: 48.0 ±0.01 mm X/Y-centring: with co...

 Suitable for fixtures and accessories. Construction height 48.0 ±0.01 mm X/Y-centring with coined cam Flatness 0.02 mm Prepared for automation Ready for code carrier ...

 Ground aluminium pallet. Construction height: 46 ±0.01 mm X/Y-centring: with springy cams, hardened, stainless Flatness: 0.01 mm  Weight: 7.2 kg

 Workpiece or electrode holder.Prepared for automation with thread M5 for code carrier fixture, with gripper contour. Scope of delivery: pallet without code carrier fi...

Workpiece or electrode holder. Not prepared for automation Available in a set with 9 pallets (S500010)

Workpiece and device holder for precision production. Prepared for automation with thread M5 for code carrier fixture, with gripper contour.Scope of delivery:pallet wi...

Workpiece and device holder for precision production. Prepared for automation with protection ring, code carrier fixture and gripper contour, without code carrier. Sco...

Chip protection between pallet and chuck for GPS 70 steel pallets C695265. Material: plastic Dimensions: Ø69.4 x 10.8 mm Use with code carrier: yes

For alignment of workpieces on GPS 240 pallets. Parallelism: 0.005 mm Required air pressure: 6 ±1 bar Supplied with dial indicator, dial indicator holder and actuator.

For controlling pneumatic chucksC217100, C217400 and C219000.

 Without function for Z cleaning Air pressure: 8 bar max. Medium: dry, filtered compressed air in accordance with ISO 8573-1, class 3.4.3 or better

Unit for controlling pneumatic chucks C217100 and C219000.1 connection (clamping/releasing)

Unit for controlling pneumatic chucks C219100 and C2191104 connectionsX/Y-locating – air-blast cleaning of Z – open/lock – turbo/ventilation

Unit to control two pneumatic chucks. 5 connectionsX/Y-locating – air-blast cleaning of Z – open/lock –turbo/ventilation – ventilation tube

Contents:E 030 220 clamp (x4)E 010 144 washer M10 (x4)E 010 143 washer M8 (x4)E 000 428 Allen screw M10x45 (x4)E 000 354 Allen screw M8x45 (x4)E 040 030* T-slot nut M1...

  Contents:C 810 881 undrilled clamp strip (x2)E 010 144 washer M10 (x4)E 010 143 washer M8 (x4)E 000 428 Allen screw M10x45 (x4)E 000 354 Allen screw M8x45 (x4)E 040 ...

For mounting two chucks on 300 mm centres.Contents:C 810 921 undrilled spacer (x1)C 810 881 undrilled clamp strip (x2)E 010 144 washer M10 (x6)E 010 143 washer M8 (x6)...

The pallet has a ground reference ruler anda ground indication hole for alignment of the references.

Fixture for code carrier 3R-863.01-10The code carrier can be clicked into position.