Products

System 3R 90809.02 Magnum chuck man. Stainless

  Pneumatic chuck with coarse guiding of the pallet.Intended for permanent building-in. Required drawbar 3R-605.1 or 3R-605.4 Required air pressure 6 ±1 bar Fixed ind...

System 3R 90809.05 Stainless Steel Macro Magnum Chuck

System 3R 90813 DFX 770-1 WITH FLUSHING CHAN.

System 3R 90815 Air Gun Fitting Kit (2 fittings)

System 3R 90815.00 Air Gun Fitting Kit (2 fittings) Shipped and sold by System 3R

System 3R 90825 Macro Chuck-manual 56 x 56

System 3R 90825.1 Macro chuck -auto. 56 x 56, long drawbar

System 3R 90829 3R-610.29 less Refix Holes

System 3R 90829.1 600.19 less 3Refix Holes

System 3R 90840-00 Macro Matrix Die chuck built-in kit Macro Press-system

System 3R 90840.00 Reference element press dia 133

System 3R 90840.1 Macro Matrix Die chuck built-in kit Macro Press-system

System 3R 90840.2 Macro Matrix WEDM chuck Macro Press-system

System 3R 90840.3 Macro Matrix EDM chuck Macro Press-system

System 3R 90840.5 Macro Matrix Drawbar Ø69 mm Macro Press-system

Requires chuck 90803.50 Through hole Ø 16 mm Weight 0.2 kg.

System 3R 90840.6 Macro Matrix Table chuck Macro Press-system

System 3R 90840.7 Macro Matrix Universal master Macro Press-system

System 3R 90840.9 Macro Matrix Spindle chuck Macro Press-system

Two ground faces for vertical or horizontal mounting on the machine table. Required drawbar 3R-605.1 Tightening torque 6 Nm Fixed index positions 4x90° Flushing duct W...

To convert 3R-600.24-S to enable long drawbar 3R-605.1.

System 3R 90855 Lifting device for Magnum pallets

System 3R 90856-03 Bushing

System 3R 90868 Stainless Steel Macro Manual Chuck that uses the 3R-405.11 drawbar.

System 3R 90874 Air Docking retrofit kit for five-axis Machine Tables

System 3R 90874.00 Air Docking retrofit kit for five-axis Machine Tables Shipped and sold by System 3R

System 3R 90892 DYNAFIX 770-1 WITH CENTRE HOLE Ø103

System 3R 90916.01 Magnum chuck special Mikron (OLD)90717.0

System 3R 90916.01-A Magnum chuck special Mikron (OLD)90717.0

 Swivelling element to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps.Note: For angle setti...

System 3R 90940.01 3R-600.14-30 chuck with Adapter Plate for Lehmann EA-510 Indexer

System 3R 90948 MAGNUM (SP26712) for CH. ADAPTER

From MacroMagnum into Macro system. Chuck adapter with built-in Macro chuck. Requires drawbar 3R-605.2 or similar. Solid X & Y-References Recommended clamping torq...

System 3R 90997 Set of two 960mm Econo-Rulers Shipped and sold by System 3R

System 3R 91063.01 142 Diameter x 12.5mm Macro Magnum Reference Element with 3RefixAM 8mm Holes

System 3R 91063.02 set of sixteen 54 x 54 x 12.5mm Macro Reference Element with 3RefixAM 8mm Holes

System 3R 91063.03 set of four 70 x 70 x 12.5mm Macro Reference Element with 3RefixAM 8mm Holes

System 3R 91063.05 High Temperature Drawbar for Pneumatic Chucks (250 degrees centigrade)

System 3R 91063.06 Macro Pneumatic Built-up Chuck with mounting flange

 Apapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS A

 Adapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS B

Adapter for mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.ICS C

Clamping bar to use with ICS clamping frame C 619 680. Dimensions 88 x 20 x 26 mm. Overall height 26 mm (incl. support lips and clamping lips). Weight 0.25 kg.

  Carrier for flat round or cubic workpieces up to 80x80 mm. Note: Mounts on HP, Magnum or MacroTwin levelling adapter. Functional height 13 mm  Clamping range round ...

Clamping support for the direct installation on WEDMmachine table. Support lips „+4“ and „0“ Recommended maximum workpiece weight 50 kg in applicationas support elemen...

 3R Zeroline clamping support, C 666 050 Clamping support for the direct installation on WEDM machine table. Support lips “+5”, “+4” and “0” 3R interface for the insta...

System 3R C 860 000, Set ICS Double clamping M8 Shipped and sold by System 3R