Products

3R-209-860, EconoRuler, 860 mm, 2 pcs. 3R-333-03, Allen key, 3 mm 3R-333-05, Allen key, 5 mm 3R-A209, Clamps, 2 pcs. Accessories

System 3R 3R-209-860.3 EconoRuler kit with supports (x2) shipped and sold by System 3R

System 3R 3R-209-860.4 EconoRuler kit with supports shipped and sold by System 3R

System 3R 3R-209-960 EconoRuler, 960 mm shipped and sold by System 3R

System 3R 3R-209-960.1 EconoRuler with accessories shipped and sold by System 3R

System 3R 3R-209-960.2 EconoRuler (x2) kit with clamps shipped and sold by System 3R

System 3R 3R-209-960.3 EconoRuler kit with supports (x2) shipped and sold by System 3R

Movable jaws of SuperVice design provide a wide clamping range for rectangular workpieces. Detachable Z-support tabs ensure simple setting-up. Hardened Recommended max...

For clamping round workpieces. To be mounted on EconoRuler. Hardened Clamping range: Ø25-130 mm Weight 0,9 kg

For clamping round workpieces. To be mounted on EconoRuler. Hardened. Clamping range Ø 15-110 mm or 120 x 120 mm. Weight 1,5 kg.

Vice for mounting rectangular workpieces up to 25 mm in the Mini system. Rust-resistant. Tightening torque 3 Nm. Weight 0.4 kg.

System 3R 3R-213.4K Mini Supervise mounted on 20mm Shank w/Torque Wrench Shipped and sold by System 3R

With magnetic attachments for setting angles on swivelling elements. Angles are set with gauge blocks. Measuring length 50 mm. Weight 1.2 kg.

For setting angles on swivelling elements. Angles are set with gauge blocks. Measuring length 50 mm. Weight 1.4 kg.

Manual block for Macro holder. Vertical or horizontal mounting on the machine table, or alternatively the WEDM system with the aid of 3R-SP6435. Required drawbar 3R-60...

System 3R 3R-217-1K Macro Indexing Block w/3R-SP6435 Dovetail, Stainless Shipped and sold by System 3R

System 3R 3R-218/20 Holder set, 3P, L= 25 mm, WEDM shipped and sold by System 3R

Set of three holders and fixing parts.• Reversible jaws• Holder length 70/23.5 mm.• Recommended maximum workpiece weight 60 kg• Weight per set 3 kg

Unit with double-insulated reference contacts for wire alignment. For Mitsubishi machines. Four wires in the cable. Weight 2.2 kg.

System 3R 3R-222.1 Chuck Mini, WEDM Shipped and sold by System 3R

Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system. Fixed index positions 2x90º. Weight 2.5 kg.

Used where vertical or horizontal displacement of workpiece or accessory is necessary. Hardended Length 70 mm.

Used where vertical or horizontal displacement of workpiece or accessory is necessary. Hardended Length 140 mm

Used where it is necessary turn workpiece or accessorythrough 90° Hardended. Weight 1.1 kg.

System 3R 3R-225 WEDM Movable End Stop Shipped and sold by System 3R Can be moved infinitely along the entire reference element. Hardened Weight 0.4 kg.

System 3R 3R-225.1 Reference stop shipped and sold by System 3R

For positioning 3Ruler anywhere on the reference elements. The stops have adjusting screws for accurate alignment. Supplied in sets of two. Weight per set 0.6 kg.

For manual mounting of SuperVice, a holder or a fixture in the WEDM system.Note: All holders including HP can be mounted.Note: Also fits the ICS system if the clamping...

System 3R 3R-226.5 Fixed head shipped and sold by System 3R

For horizontal clamping SuperVice and holders in vertical Macro chucks.Weight 1.4 kg.

Surface plate with reference stops, a mounting stone with bushings and holes for mounting a chuck/reference element and through holes for mounting on the surface plate...

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate. Dimensions 300x200x100 mm....

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate. Dimensions 300x200x100 mm...

Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool f...

System 3R 3R-228S Presetting station shipped and sold by System 3R

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.Dimens...

System 3R 3R-23 Control rod, Mini Shipped and sold by System 3R

For clamping workpieces on rulers etc.Weight 1.8 kg.

Vice for mounting rectangular (<60 mm) and round (8-45 mm) workpieces in the WEDM system. Rust-resistant. Tightening torque 15 Nm. Weight 1.5 kg.

System 3R 3R-232.8K WEDM Super Vise w/Torque Wrench (Vee Jaw not Included) Shipped and sold by System 3R

For mounting SuperVice, a holder or a fixture directly on the machine table.Note: All holders including HP can be mounted. Adjustable in three axes when clamped in the...

System 3R 3R-237.1 Holder, "do-it-yourself" shipped and sold by System 3R

For fixture, workpiece or 3R-239.2, 3R-239.3, 3R-294.1, 3R-294.2, 3R-294.6 and 3R-402.1.Weight 0.6 kg.

System 3R 3R-239-275 3Ruler, 275 mm shipped and sold by System 3R