Pallets & Holders

Journal Ø10x10 mm. Intended mainly for graphite electrodes. To be mounted on 3R-491E with three MFT4x12 screws and adhesive.Supplied in sets of 30.

For round electrodes Ø4-8 mm or square < 8x18 mm, and with maximum height 30 mm.Supplied in sets of 5.

The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.Supplied in sets of 30.

For collets ETS10 Electrode sizes 0.1-2 mm Building-in heigth 47 mm Weight 0.1 kg.

For colles ER16 Electrode sizes 0.5-10 mm Building-in height 59.5 mm Weight 0.2 kg.

For copper or graphite electrodes.NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing. Adapted for automatic changing Supplied ...

 Top and bottom faces parallel-ground to within 0.002 mm.NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing. Adapted for autom...

Used in combination with 3R-491E when soldering round (<50 mm) or square (<40 mm) copper blanks. Permits mounting in MacroCombi chucks. Supplied in sets of 30 Ac...

Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks. Supplied in sets of 30 *Accessory ...